Sanding & Polishing

Close filters
 
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Arkansas-Bankstein
Arkansas oil stone
Arkansas oil stone for especially fine sharpening of all cutting tools. As grinding fluid we recommend our drilling oil No. 90 905. Measurements 100 x 25 x 13 mm.
€10.40 *
Radierer mit Glashaarpinsel - Durchmesser 4 mm
Glass fibre burnishing tool, 4 mm Ø
Glass fibre burnishing tool with plastic handle and glass fibre refill (4 mm Ø). Length 120 mm.
€6.50 *
Glass fibre refill, 4 mm Ø
Glass fibre refill, 4 mm Ø
Glass fibre refill, 4 mm Ø
From €0.90 *
Stahlwolle zum Schleifen und Polieren
Steel wool
Steel wool, produced from specially tough steel wire, rolls of 200 g each. Optimal for grinding and polishing of wood and plastics. Steel wool is more suitable than grinding paper: No scratching marks and no clogging up.
€4.90 *
Mikro-Schleifpapier
Micro Abrasive Paper
Micro Abrasive Paper for wet and dry grinding. 1 sheet grinding paper each grain 1000, 1200, 1500, 2000. Eeach 230 x 280 mm. For grinding of metal, wood, plastics.
€5.90 *
Maschinenradierer
Burnishing tool for engines
Burnishing tool for engines. Replaceable burnishing pin made of flexible plastic containing fine grained grinding powder. Holder holds burnishing pin by a collet chuck. Suitable for all mini drills. Length 55 mm and shank 2.34 mm.
€6.90 *
Schleifvliesbürsten mit Scotch Brite
Miniature brushes with Scotch Brite
Miniature brushes with Scotch Brite™ 3 pcs.: fine - medium - coarse, Ø 25 mm; shank Ø 2.34 mm. Rust and dirt can be easily removed.
€8.90 *
Bürste aus abrasivem Nylon
Brush of abrasive nylon
Brush of abrasive nylon for removing old paint layers on metal models. Shank 2.34 mm Ø.
€5.90 *
Bohrschleifer (mit Spannzangen) Proxxon Micromot 50E
MICROMOT 60 E
Minidrill MICROMOT 60/E, for milling and drilling, electronic speed control from 5,000 - 20,000 rpm, stable housing of fibreglass, with steel collets in sizes 1.0-1.5-2.0-2.4-3.0-3.2 mm. MICROMOT -Transformer is necessary. 12V DC, 40 W....
€36.00 *
Biegewelle Proxxon Micromot 110/BF
Flexible Drive Proxxon Micromot 110 BF
Flexible Drive 110/BF extremely flexible, triple ball bearing system, with quick-action chuck of 0.3-3.2 mm. Total length 100 cm. For maximum speed of 25,000rpm.
€30.90 *
Transformer Proxxon Micromot NG 2 E
Transformer Proxxon Micromot NG 2 E
Transformer NG 2/E with electronic speed control. 220-240 V, capacity of 2.0 A at 12 V under load, weight 1 kg.
€38.50 *
Universalhalter Proxxon UHZ (Gerätehalter für Micromot)
Universal Holder UHZ
Universal Holder with ball and socket, easily and securely to be fitted to a workbench or table (max. 60 mm) top by means of a wing nut. For MICROMOT.
€33.90 *
Scheibenbürsten
Wire brushes
Wire brushes . The wheel wire brushes are used for cleaning surfaces and for removing flux and scale etc. Approx. 20 mm diameter and supplied with 2.34 mm shank.
From €2.90 *
Schleifstab und Ersatz-Schleifbänder
Grindstick and spare belts
Grindstick, approx. 165 mm long with one exchangeable grinding band . Special construction of stick provides pushing the 6.4 mm wide band, so it can be used all around. Grit 320. (picture in the foreground) Set of 3 spare belts, grit...
From €6.50 *
HSS Stichel
Gravers HSS
Flat Edge Gravers, thickness of edge 2 mm, length 100 mm. Round Edge Gravers, thickness of edge 1.2 mm, length 100 mm. Onglette Gravers, thickness of back 2 mm, length 100 mm Knife Gravers, thickness of back 2 mm, length 100 mm
€20.90 *
2 Stück Diamant Ersatzspitzen für Mini-Graviergerät
Mini engraver, 2 points
2 diamond points for M ini engraver , length 25 mm, Ø 2.35 mm.
€15.90 *
Radierer mit Messingdrahtpinsel - Durchmesser 4 mm
Pencil with brass brush
Pencil with brass brush, plastic handle.
€6.90 *
Bohrschleifer (mit Bohrfutter) Proxxon Micromot 50/EF
MICROMOT 60 EF
Rotary tool MICROMOT 60/EF , for milling and drilling, continuously variable speeds from 5,000 - 20,000 rpm, stable housing of fibreglass, with keyless chuck for shanks from 0.3-3.2 mm. MICROMOT -Transformer is necessary. 12V DC, 40 W...
€35.50 *
Messingdrahtbürste
Brass wire brush
Brass wire brush, slightly curved, length 160 mm, wire diameter 0.15 mm, 3-row.
€5.30 *
Radierer mit Glashaarpinsel - Durchmesser 2 mm
Glass fibre burnishing tool, 2 mm Ø
Glass fibre burnishing tool with plastic handle and glass fibre refill (2 mm Ø). Length 140 mm.
€7.90 *
Ersatzpinsel - Durchmesser 2 mm
Glass fibre refill, 2 mm Ø
Glass fibre refill, 2 mm Ø
€1.00 *
Grinding and Polishing Set
Grinding and Polishing Set
Grinding and Polishing Set
€12.90 *
SET: Schleif- und Polierstifte - 10 teilig
Mounted point and polisher set
Mounted point and polisher set, 10-part, in different combinations, fine - medium grit, total length 35 - max. 52 mm, shank diameter 2,35 - 3,0 - 3,2 mm.
€13.50 * €14.90 *
Stichelhefte aus Hartholz
Handles for gravers
Handles for gravers, made of wood, polished and nickel plated ferrule. ball shape mushroom shape, 1 flat side
€2.70 *

Sanding and polishing are important steps in model building to achieve a smooth and clean finish. There are several ways to sand and polish in model making, depending on the material you are working with and the finish you want to achieve.

 

 

 

One way to sand in model making is to use sandpaper. This paper comes in different grits depending on how coarse or fine you want to sand. To achieve a smooth finish, you can start with coarse sandpaper and then gradually use finer sandpaper until you achieve the desired result. It is important to always sand in one direction when sanding to avoid scratches.

 

 

 

Besides sandpaper, there are other ways to sand in model making. For example, you can use a sanding machine or sanding block. These tools are especially good for larger surfaces and allow for faster sanding.

 

 

 

After you have sanded the model, you can polish it to achieve a shiny finish. There are different polishes you can use for this, depending on the material you are working on and how shiny you want the finish to be. It's important to use the polish according to the instructions on the package and to make sure your work surface is clean and well-lit.

 

 

 

Overall, it's important to use the right tools and techniques when sanding and polishing in modeling. This way, you can achieve a smooth and clean finish and successfully complete the model building project.

Viewed