Products from Fohrmann
No results were found for the filter!
Mini Etched Sheet Bender Mini Etched Sheet Bender, for photo-etched parts to 0.5 mm. Size 105 x 105 mm. Without accessories. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH...
€94.90 *
Soft vice jaws Soft vice jaws. Supplied in length of 500 mm, may be cut to a suitable length. Material aluminium. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH...
€9.90 *
Magnetic felt vice jaws Magnetic felt vice jaws to protect painted, polished or sensitive surfaces against damage. 60 mm width, 12 mm high, 8 mm thick. Responsible person for the EU The economic operator established in the EU is responsible for this product:...
€12.90 *
Mechanics mirror Mechanics mirror for checking in awkward places. Length 163 mm, Dia. = 20 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141...
€5.30 *
Priming for metal Priming for metal, thin and clear as glass, especially for brass and copper. No problem with undercoating by air-brush. Quick drying. Apply undiluted. Cont. 50 ml. Responsible person for the EU The economic operator established in the EU...
Content 50 ml (€13.80 * / 100 ml)
€6.90 *
Thinner for primer Thinner for primer, cont. 50 ml. For cleaning the airbrush accessories Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald...
Content 50 ml (€7.80 * / 100 ml)
€3.90 *
Weathering and aging color sets for models Special colours for weathering of models. Wagons made older, realistic landscapes and buildings make the models look natural. They are water soluble and usable for plastics, wood, metal, glass and ceramics. Glas-ses of 10 ml contents....
Content 60 ml (€28.17 * / 100 ml)
€16.90 *
Weathering and aging color sets for model... For giving your model railway vehicles that authentic "in use" appearance. The paints are water based and suitable for use on painted metal and plastic surfaces. The set contains of 6 special colours: Oxide green - red brown - oil - sand...
Content 60 ml (€28.17 * / 100 ml)
€16.90 *
Weathering and aging color sets for model... For giving your model railways vehicles that authentic "in use" appearance. The paints are water based and suitable for use in painted metal and plastic surfaces. The set contains of 6 special colors: earth brown - dust brown – rust -...
Content 60 ml (€28.17 * / 100 ml)
€16.90 *
Wooden stand Wooden stand, without bottles, drilling 24mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com Te.: +49...
€4.90 *
Twist Drill Set with plastic stand Twist Drill Set with plastic stand. 41 pcs. HSS quality drills DIN 338 from 1.0 to 5.0 mm, in steps of 0.1 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge...
€55.95 *
Set of milling cutters Set of milling cutters, 5 pcs. with C-cut(TiCN) coating, with cylinder-shank Ø 6 mm and 3 flutes. As good as shank type milling and slot drills. Diameters 2-3-4-5-6 mm. Responsible person for the EU The economic operator established in...
€79.90 *
Small Reverse action tweezers Small Reverse action tweezers, length 53 mm, grooved jaws, opening of jaws max. 2 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141...
€8.90 *
Looking Pliers Looking Pliers with bended jaws and wire cutter. Capacity of jaws 24 mm. Total length 110 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr....
€16.00 *
Page magnifier Page magnifier, 4-5x magnifica-tion. Made from plastic. 160 x 220 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald...
€4.90 *
Micro wheel puller N, Z Micro wheel puller. For hand pulling at bigger watches with polling counter points 0.7 - 0.9 - 1.2 - 1.4 mm. Also for pulling off insulated wheels of gauge N and Z. Responsible person for the EU The economic operator established in the...
€109.00 *
Keyhole Saw Keyhole Saw with aluminium holder. For swaing in edges and angles difficult to reach with other saws. Usable measurements of the blade: 35x4,3x0,5mm. Responsible person for the EU The economic operator established in the EU is...
€8.50 *
Keyhole Saw Spare Blades Keyhole Saw Spare Blades. Set of 5 pieces. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com Te.: +49 (0)...
Content 5 Stück (€1.78 * / 1 Stück)
€8.90 *
Cutting- and lubrication grease Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann...
Content 350 g (€9.14 * / 100 g)
€32.00 *
Maintenance oil Maintenance oil in practical drip oilier, keeps up and lubricates all fine-mechanical threads. Cont. 12 ml. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge...
Content 12 ml (€49.17 * / 100 ml)
€5.90 *
Small centre punch Small centre punch with fine tip, hardened and nickel-plated. Length 80 mm, diameter 6 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2...
€5.90 *
Internal turning tool made of special steel Internal turning tool, round, made of particularly hard special steel including brass insert for secure clamping. Diameter: 2,00 mm Diameter: 4,00 mm Responsible person for the EU The economic operator established in the EU is...
€23.90 *
Hint!
Small Hand Drill Small Hand Drill. Drill mount with knurled aluminium handle, freely rotating hand rest and three jaws chuck, capacity 0.4 - 3.2 mm. Responsible person for the EU The economic operator established in the EU is responsible for this...
€24.90 *
Miniature Machine Vice Miniature machine vice with adjustable stop, suitable for clamping of very small model building components. Stepped vice jaws, with groove in base for receiving a sliding block. Body and accurately controlled sliding jaw made of grey...
€269.00 *
Machine vice Machine vice with adjustable stop, suitable for clamping of model building components. Stepped vice jaws, with groove in base for receiving a sliding block. Body and accurately controlled sliding jaw made of grey cast iron. Dimensions...
€295.00 *
Silver soldering paste Silver soldering paste, 55 % silver content. Ready for use. Reusable by adding a few drops of water. Melting point 620° C. Please stir before use. Cont. 5 g. Responsible person for the EU The economic operator established in the EU is...
Content 5 g (€218.00 * / 100 g)
€10.90 *
Soldering oil Soldering oil. A special flux for soft soldering of steel and high grade steel. Especially suitable for soldering our spring steel wire. Cont. 50 ml. TIP: We recommend our electronic solder. Responsible person for the EU The economic...
Content 50 ml (€9.80 * / 100 ml)
€4.90 *
Bronze spring wire (different Ø) Bronze spring wire, easy to solder, high conductivity. ldeal for constructing overhead catenary systems. Different diameter: 0.3 mm - rolls of 3 m 0.5 mm - rolls of 5 m Responsible person for the EU The economic operator established in...
Content 3 Laufende(r) Meter (€0.83 * / 1 Laufende(r) Meter)
From €2.50 *
Spring gauge Spring gauge, light pattern with brass scale, reading 0.1mm. For quick measuring of diameters and thickness of plates. Messuring capacitiy 10mm. Responsible person for the EU The economic operator established in the EU is responsible for...
€14.90 *
Small Square Small Square, without back, made of 1mm strong steel sheet, nickel-plated. Measurements: 110 x 55mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH...
€5.50 *
Model engineering assembly square Model engineering assembly square (idea: Jürgen Lange) with three steps for fastening. To be used for vertical soldering, sticking, assembling of sheets or metal strips. Measurements 65 x 30 x 5 mm. Delivery 1 piece without screw clamp....
€4.90 *
Figure and radius gauge Figure and radius gauge. Useful length 150 mm, depth 40 mm. This gauge is ideally suited for the reproduction of any configuration from the simple radius to com-plicated shapes. Responsible person for the EU The economic operator...
€28.90 *
Gauge for gearwheels Gauge for gearwheels. A simple tool out of 0.3 mm nickel silver sheet for quick finding of a gearwheel module. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge...
€7.90 *
Rail Gauge H0 Rail Gauge (idea: Frank Ottmüller). For checking DC models (14.3 mm) and Märklin (13.8 mm). Aluminium construction. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann...
€14.90 *
Small steel scriber Small steel scriber with fine, hardened point and aluminium handle. Length 125 mm approx. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2...
€6.90 *
Book: Materialien für den Modellbau Materialien für den Modellbau. In german language only. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com...
€15.00 *
Book: Drehen für Modellbauer - Band 1 In German language only! Drehen für Modellbauer - Jürgen Eichardt Zweibändiges Fachbuch für den schon geübteren Modellbauer Band 1: Das ABC des Hobbydrehers Im anspruchsvollen Modellbau ist der Einsatz einer Werkzeugmaschine meist...
€34.90 *
Book: Drehen für Modellbauer - Band 2 In German language only! Drehen für Modellbauer – Jürgen Eichardt Zweibändiges Fachbuch für den schon geübteren Modellbauer Band 2: Besondere Aufgaben und Technologien Der Autor erläutert etwas schwierigere Operationen und zeigt...
€32.90 *
Book: Fräsen für Modellbauer - Band 1 In german language only Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com Te.: +49 (0) 7722 869878
€24.90 *
Book: Fräsen für Modellbauer - Band 2 In german language only Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com Te.: +49 (0) 7722 869878
€24.90 *
Book: Metallverarbeitung im Modellbau Metallverarbeitung im Modellbau - Peter Wright In german language only. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald...
€29.00 *
Model Railway Wheel Puller H0 Mini wheel puller for all areas of model engineering. Clamping range 3-35 mm, span depth 25 mm. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Suitable for pulling locomotive and wagon wheels H0. Tip: Order spare tips or/ and hooks at...
€32.90 *
Replacement hooks for pullers 2 Replacement hooks for pullers. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald service@fohrmann.com Te.: +49 (0) 7722 869878
€10.20 *
Wheel flange cutting tools for RP 25 profiles Wheel flange cutting tools for RP 25 profiles, for H0 gauge. Measurement 6 x 6 mm. Instructions included. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH...
€46.90 *
Wheel flange cutting tools for NEM profiles Wheel flange cutting tools for NEM profiles (for H0 gauge). Measurement 6 x 6 mm. Instructions included. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH...
€46.90 *
Holder for saw blades (hole 8 mm) Holder, shank 8 mm for our saw blades No. 28 302 - 28 130 with hole 8 mm. Responsible person for the EU The economic operator established in the EU is responsible for this product: Fohrmann Werkzeuge GmbH Ginsterstr. 2 78141 Schönwald...
€23.00 *
Mini cutting board Mini cutting board for exact cutting of small profiles up to 5 x 5 mm. Precut guides for cutting angles of 30, 45 and 90 degrees. All metal con-struction. Will accept all saw blades up to 0.5 mm. For sawing metal profiles we recommend...
€62.90 *
Viewed