Products from Fohrmann

Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
7 From 8
No results were found for the filter!
Kreissägeblatt aus Vollhartmetall
Circular blade, carbide
Circular blade, carbide, diam. 63 mm, bore 16 mm. For glass fibre materials. 63 x 0.9 x 16 mm, 96 teeth. Fit for various other manufacturers' products as well as BÖHLER table circular saw.
€64.90 *
Abstandshalter für Flexgleise
Adjustable spacer
Adjustable spacer for laying double track ensuring correct way. Especially useful when used in conjunction with Track Clamps. Track H0 - can be adjusted from 40 mm to 64.6 mm. Track TT / H0m - can be adjusted from 32 to 60 mm. Track N /...
From €26.90 *
Schruppstahl rechts
Cutting tools 8 x 8 x 80 mm
Cutting tools 8 x 8 x 80 mm out of very hard special steel. Pointed cutting tool Side cutting tool, right Side cutting tool, left Rough cutting tool, right Cutting tool Interior turning tool, 140 mm
€14.90 *
Drehstähle mit Wendeplättchen
Turning tools with carbide indexable inserts
Turning tools with carbide indexable inserts Dimension 8 x 8 mm suitable for all lathes Length 60 mm, each in the 3 forms, delivery per 1 piece, please select: finishing tool Side steel right - SOLD OUT Side steel left
€36.90 *
Drehstähle 6 x 8 x 60 mm mit Wendeplättchen
Turning tools, with tungsten tip
Turning tool, with replaceable tungsten carbide tip. Picture shows all 3 varieties. Diameter 6 x 8 mm for your UNIMAT 3 and UNIMAT 4 Length 60 mm. Turning tool, neutral - Turning tool, right hand - Turning tool, left hand Delivery one...
€36.90 *
Collet chucks ESX 16
Collet chucks ESX 16
Collet chucks ESX 16
From €45.00 *
Torx Winkelschlüssel T8
Offset wrench for Torx T8
Offset wrench for Torx T8. For our turning tools 41617-41619 and 41717-41719.
€3.10 *
Stichelhefte aus Hartholz
Handles for gravers
Handles for gravers, made of wood, polished and nickel plated ferrule. ball shape mushroom shape, 1 flat side
€2.70 *
Schaftfräser
End mills
End mills, short with straigth shank 6 mm Ø and 3 or 4 flutes. HSS-E08 DIN 844K Typ N Different diameters: 2.00 mm 2.50 mm 3.00 mm 4.00 mm 5.00 mm 6.00 mm
€14.90 *
Bohrer Schachtel / Box leer
Twist drill box empty
Twist drill box empty, for storage of twist drills and small tools, clear sliding box with 10 compartments, compartment width approx. 12 mm. The ideal box for storing your smallest drills, milling cutters, etc. Internal dimensions...
€2.70 *
Echt Rotmarder Aquarellpinsel
Red-sable aquarell-brushes
Red-sable aquarell-brushes for finest painting in all areas of modelling.
From €3.50 *
Diamant-Trennscheibe Ø 19 x 0,65 mm
Diamond cutting disc
Diamond cutting disc, Ø 19 x 0.65 mm encl. shank.
From €17.90 *
HSS Kreissägeblätter DIN 1837-1838
Circular blades, HSS
Circular HSS blade to DIN 1837/1838. Diam. 63 mm, bore 16 mm. Fit for various other manufacturers' products as well as BÖHLER table circular saw. Blades may be used on profiles and sheets of aluminium, brass and copper. For very thin...
€33.90 *
Schlitz-Schraubendreher
Slotted Screwdriver
Slotted Screwdriver, freely rotating cap for minimal friction, hanging hole for easy storage or inserting lever, blades manufactured from chrome-molybdenum-vanadium steel, superior hardness, full-length polypropylene core. Tip dimension...
From €5.90 *
Federstahlstäbe DIN 17223 poliert (verschiedene Ø)
Spring steel bars
Spring steel, round bars, DIN 17223, in straight lengths of 500 mm.
From €1.10 *
Kupferlackdraht dünn in verschiedenen Farben
Enamelled copper wire
Enamelled copper wire, diameter 0.15 mm, bobbin with 50 m . 8 different colours for model engineering (car-system, signals), soldering temperature approx. 350 °C.
Content 50 Laufende(r) Meter (€0.13 * / 1 Laufende(r) Meter)
€6.50 *
Messingdraht weich (verschiedene Ø)
Brass wire
Brass wire, soft, very malleable, length 3 m each.
From €2.00 *
Phosphor Bronze Blech federhart (versch. Stärken)
Phosphorus bronze
Phosphorus bronze spring hard 150 x 200 mm
From €7.50 *
Rundmessing Ø 0,20 oder 0,30 mm (Set á 10 Stück)
Round rod, brass, Ø 0.20 or 0.30 mm (10pcs.)
Profiles of brass, round rod, drawn, each 300 mm long. Packed with 10 pieces = 1 packaging unit. Available diameters: 0.20 mm 0.30 mm
From €3.90 * €4.90 *
Rundmessing versch. Ø 0,50 bis 6,00 mm
Round rod Ø 0,50 - 6,00 mm
Round rod, brass, drawn, l = 500 mm 0.5 mm (5 pcs.) 0.6 mm (5 pcs.) 0.8 mm (5 pcs.) 1.0 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 3.5 mm 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6,0 mm
From €1.00 *
Hexagon bar of brass
Hexagon bar of brass
Hexagon bar of brass for model-engineering, l = 500 mm
From €2.00 *
Silberstahl Stangen für Modellbau (verschiedene Ø)
Silver steel
Silver steel, bars length each 500 mm, diameters 1-2-3-4-5-6-8 mm. Silver steel is an excellent material - because hardenable - for production of shafts, axles and tools. Assortment of silver steel, 7 bars length each 500 mm, diameters...
From €1.90 *
T-Profile aus Messing
T-Profiles
T-Profiles, brass, milled, l = 500 mm Sizes (h x b) 1 x 1 mm l = 500 mm 1,5 x 1,5 mm l = 500 mm 2 x 2 mm l = 500 mm 2,5 x 2,5 mm l = 500 mm 3 x 3 mm l = 500 mm 3,5 x 3,5 mm l = 500 mm 4 x 4 mm l = 500 mm 4,5 x 4,5 mm l = 500 mm 5 x 5 mm...
From €3.10 *
Zellkautschuk Platten selbstklebend A4 (versch. Stärken)
Cellulose Rubber Sheets
Cellulose rubber sheets, one side selfad-hesive, set of 2 pcs. Measurements: 200 x 100 x 5 mm each. Lightweigth and elastic material especially mounting of motors in model aero-planes, -ships und –engine.
From €5.90 *
Mikro Niete aus Messing mit rundem Kopf für Modellbau
Micro rivets, brass
Micro rivets, made of brass, with round head. These tinies should be soldered or glued from the back. For all measurements of aprox.1:30 to 1:200. Approx. 40 pcs. each pack. shank-Ø: 0,20 mm - head-Ø: 0,30 mm - length: 4,00 mm - not...
From €10.90 *
Sechskantschrauben aus Messing für Modellbau
Hexagon head screws
Hexagon head screws, brass, packet with 10 pcs. each. All sizes in mm. thread M1,0 M1,0 M1,2 M1,2 M1,4 M1,4 M1,6 M1,6 M2,0 M2,0 AF width across flat 1,5 1,5 2,0 2,0 2,0 2,0 2,5 2,5 3,0 3,0 k = height of head 0,8 1,0 1,0 1,0 1,0 1,0 1,2...
Content 10 Stück (€0.32 * / 1 Stück)
From €3.20 *
Hint!
Touch Point Präzisionspinzette 130 mm
Touch Point tweezers
Touch Point tweezers reduce the amount of work by approx. 33% due to the attached recessed grips (ergonomically designed). The forces acting on tweezer tips and gripped components are reduced to a minimum. The tweezers are retained for...
From €11.50 *
SET: Nadelfeilen (grob oder fein)
Set of needle files
Set of 6 needle files: triangular, square, round, half round, pillar, knife. 1. Set of needle files, cut 1 (bastard) in plastic wallet, length 160 mm, also for wood and plastics. 2. Set of needle files, cut 3 (fine) in plastic wallet,...
From €21.90 *
Resinsäge mit Griffstück und 2 Klingen
Resin Saw
Big fretsaw for jewellers with tightening screw and adjsutable stirrup. Depth 150 mm approximate. For all saw blades.
€16.90 *
UV-STAR - Spezialkleber Set mit UV-Lampe
UV-STAR
Cyanolit 102. Thin and quick setting adhesive on methy-cyanacrylate base. Suitable for gluing all metals as well as for complicated exact fitting units. Pipette of 2 grms. Please store in a cool place!
Content 3 g (€39.67 * / 10 g)
€11.90 *
Das große Lötbuch - Thomas Riegler
Book: Das große Lötbuch
Metallverarbeitung im Modellbau - Peter Wright In german language only.
€29.90 *
Messingblech MS 63 halbhart 150 x 200 mm (versch. Stärken)
Brass MS 63
Brass MS 63, half hard 150 x 200 mm
From €7.30 *
Pinzettenzange 45° gebogen - mit Hieb
Tweezer pliers 45° bent
Tweezer pliers 45° bent Available in two different versions: without cut (smooth jaws) with cut (ribbed jaws) For handling components in areas that are difficult to access. Steel thickness 3.0 mm. Length 152 mm.
€19.90 *
Pinzettenzange gerade - mit Hieb
Tweezer pliers straight
Available in two different versions: without cut (smooth jaws) with cut (ribbed jaws) For handling components in areas that are difficult to access. Steel thickness 3.0 mm. Length 152 mm.
€18.90 *
Mini Nägel Stahl blank für Modellbau (versch. Längen)
Mini nails
Mini nails, steel shiny with flat head, special sizes; approx. 500 pcs. each pack. Indispensable for model engineering, model ship building and model aeroplane constructions. Different dimensions: 0.70 mm x 10.00 mm (head Ø 2.0 mm -...
From €4.90 *
Ersatzsägeblatt für Resinsäge
Spare blade for resin saw
Big fretsaw for jewellers with tightening screw and adjsutable stirrup. Depth 150 mm approximate. For all saw blades.
€4.90 *
Dose mit Scharnierdeckel aus glasklarem Polysterol
Box with hinged lid made of transparent polysterol
Small round plastic box. Inner dimension 23 x 7 mm, overall dimension 26 x 9 mm.
€2.90 *
Uhrmacher-Festhalteschraubendreher
Screw Holding Screwdriver for Watchmakers
Watchmaker screw-holding screwdriver for screws up to M 3. length 120, width of blade 1,6 mm.
€26.90 *
Ersatz Lötspitze Bleistiftform für Dual Power Lötkolben
Soldering tip pencil shape
Soldering tip set 3 piece, 4 mm, pencil shape, wedge shape and chisel shape, fits No. 61 300.
€5.80 *
Ersatz Lötspitze Meißelform für Dual Power Lötkolben
Soldering tip chisel shape
Soldering tip set 3 piece, 4 mm, pencil shape, wedge shape and chisel shape, fits No. 61 300.
€5.80 *
Add on part for N, TT for Wheel quartering tool
Add on part for N, TT for Wheel quartering tool
Wheel quartering tool. With the help of this tool it is possible to adjust the 90° shift of crank-wheels of steam engines exactly. The 90° shift can be precisely determined by a prisma containing a crosshair. Illustrated instructions...
€8.90 *
Hint!
Mini HSS Bohrer geschliffen DIN 338
HSS-drills DIN 338
0.3 mm Ø - HSS-drills DIN 338 for wood and metal drill-Ø = shank-Ø
From €0.95 *
Modellbahn Gleisbau: Vorstecher
Pricker for model railway track...
Pre-cutters, indispensable also for screwing tracks. New design, wooden handle unpainted!
€5.90 *
Ersatz Lötspitze für Lötstation ST 081 in Bleistiftform
Soldering tip ST 081
Soldering tip, pencil shape, borehole 2 mm, for soldering station ST 081
€2.90 *
Pinsel-Set Hobby (3 breite Pinsel im Etui)
Brush Set Hobby (3 brushes packed in case)
Brush Set Hobby with 3 brushes packed in case
€6.20 *
Seitenschneider vorn, schräg, mini
End cutting pliers/ oblique cutting nipper
End cutting pliers/ oblique cutting nipper. Tool for a front, clean, flush cut. The special 60° angle permits the tool to be easily used in difficult to reach areas. Steel thickness 3.0mm. Tool length 144 mm. Soft wire/ copper wire up to...
€18.90 *
Alu Mini Zwinge
Aluminium mini clamp
Aluminium mini clamp , ideal for model makers and hobbyists, dimensions 65 x 50 mm, for workpieces up to max. 47 mm x 34 mm, weight only 55 g
€9.50 *
Mini Biegevorrichtung für weiche Drähte & Blechstreifen
Mini bending device
Mini bending device made of aluminium, suitable for bending fine, soft wires in uniform radii and shapes. Various pins (approx. 2.3 and 3.3 mm Ø) and distance rollers (approx. 7.9/ 11.6 and 19.2 mm Ø) allow a wide range of applications...
€49.90 *
7 From 8
Viewed