Products from Fohrmann
No results were found for the filter!
Small slotted screwdrivers
Small slotted screwdrivers, assortment of 6 pieces for slot widths from 0.6 - 1.8 mm in a case. Length from 70 - 95 mm.
€14.90 *
SET: H-Profiles
H-profiles made of brass, milled Packed in transparent plastic tube, variable length (Ø 16 mm) Sizes height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x 0,30 mm - length: 500 mm, 1 piece...
€28.00 *
SET: T-Profiles
T-profiles made of brass, milled, Packed in transparent plastic tube, variable length (Ø 16 mm) Sizes height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x 0,30 mm - length: 500 mm, 1...
€25.00 *
SET: U-Profiles
U-profiles made of brass, milled, length 500 mm each. Packed in transparent plastic tube, variable length (Ø 16 mm). Profile Sizes in height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x...
€30.00 *
SET: Angle
Angle profiles made of brass, milled Packed in transparent plastic tube, variable length (Ø 16 mm) different sizes a x b: 1 piece side a: 1,00 mm - side b: 1,00 mm - length: 500 mm - thickness 0,25 mm, 1 piece side a: 1,50 mm - side b:...
€24.00 *
SET: Round rod
Round brass, drawn, length 500mm Packed in transparent plastic tube, variable length (Ø 16 mm) Various diameters: 1 piece 1,00 mm, 1 piece 2,00 mm, 1 piece 3,00 mm, 1 piece 4,00 mm, 1 piece 5,00 mm, 1 piece 6,00 mm.
€15.00 *
SET: Tubes
Brass tubes, drawn, Packed in transparent plastic tube, variable length (Ø 16 mm) different sizes: Ø 1,00 mm - wall thickness: 0,20 mm - length: 500 mm, Ø 1,50 mm - wall thickness: 0,20 mm - length: 500 mm, Ø 2,00 mm - wall thickness:...
€14.00 *
Titanium Reverse Action Tweezers
Titanium Reverse Action Tweezers, heat resistant, solder repellent, length 160 mm. Suitable as soldering tweezers, does not conduct heat.
€26.90 *
NT circle cutter iC 1500 P
NT circle cutter iC 1500 P from Japan. Housing made of transparent plastic for light cutting work (thin materials such as paper, cardboard, films, vinyl, leather etc.) suitable for diameters from 1.8 - 17 cm Cutting depth/ depending on...
€31.90 *
Side Cutter, strong
Side Cutter, strong . Strong tool for a flush cut. Special INDUCTION treatment of blades. For the cutting of copper wire up to 2.50 mm (AWG 10) and ferrous materials up to 1.6 mm (AWG 14). Steel thickness 3.0mm. Tool length 160mm.
€22.90 *
Fretwork board/ Bench pin
Fretwork board/ Bench pin with V-slot and clamp from hardwood. Used as a support for sawing ans drilling. Size approx. 190 x 60 x 14 mm.
€9.90 *
Tweezers stainless, tip coated
Tweezers stainless, straight, tip coated with plastic, length 200 mm.
€8.50 *
Flat Spatula
Flat Spatula, steel, nickel plated, 140 mm. A universal tool for stirring, mixing, application fillers, forming.
€3.90 *
Silicone work mat
Practical silicone work mat (silicone soldering mat) for assembling, tinkering, repairing or soldering. Dimensions: 45x30cm, flexible, antistatic, heat-resistant up to 500°C, washable. Mat is odourless and non-toxic. 14 storage...
€19.90 *
Helping hands
Helping hands , indispensable for all delicate work where you need both hands to work, such as soldering and fine assembly work. Four flexible arms with 360° swivel clamps hold workpieces or circuit boards firmly, sturdy and non-slip...
€29.90 *
Viewed