Products from Fohrmann
No results were found for the filter!
Pin vice (Ø = 0 - 3,20 mm)
Pin vice with knurled brass handle, nickel plated, with revolving hand plateau light metal, with screw head and 2 hardened double-side collet chucks for reception of small drills. Length 105 mm, capacity 0 – 3.2 mm. Made in Asia.
Wheel Spacer (Back to back) measuring / setting tool for H0 wheels. The tool is supplied with 2 spindle points, one for locomotive wheel setting and one for wagon/carriage wheels fitted on pin-point bearing axles. With set of spindle...
Ballpoint hexagon key wrenches
Ballpoint hexagon key wrenches with plastic handle, 2.5 mm - especially for Krause-Clamps and adjustable spacers.
Model engineering assembly square
Model engineering assembly square (idea: Jürgen Lange) with three steps for fastening. To be used for vertical soldering, sticking, assembling of sheets or metal strips. Measurements 65 x 30 x 5 mm. 1 piece without accessories.
Glue 'n' Glaze
Glue 'n' Glaze, 50 ml. For making crystal clear windows and bonding canopies and most plastics. Bonds wood, plastic, metal, painted surfaces. For glazing windows up to 6mm. Use with micro-tips.
Content 50 ml (€16.00 * / 100 ml)
Soldering plate made of heat resistable ceramic material. A great number of holes means a very low thermal resistance. You can also put steel pins into the holes to fix your work part on the soldering plate. Dimensions 197 x 140 x 13mm....
Steel pins, 1,3 x 16 mm for fixing work parts on our soldering plate 61022. Box with about 50 pins.
Rail Saw, blade 140 mm long, 0.3 mm thick, finest tooth (20 teeth/cm), for sawing model rails, gauge Z, N, TT, H0, 0. Also for profiles of brass, wood and plastics.
Silver solder, soldering temperature 650 deg. C. For hard soldering brass, copper and hard materials. Supplied in lengths 1 x 500 mm.
Third hand. Tweezers on iron base, adjustable as you like by 2 ball and socket joints. Leaves both hands free for work.
Assembly Tweezers with two flat even jaws, 45-degree angle, approx. length 125 mm.
Glass fibre burnishing tool, 4 mm Ø
Glass fibre burnishing tool with plastic handle and glass fibre refill (4 mm Ø). Length 120 mm.
Keyhole Saw Spare Blades
Keyhole Saw Spare Blades. Set of 5 pieces.
Content 5 Stück (€1.78 * / 1 Stück)
Klüber paste. Creamy white greasing and installation paste. As lubricating paste for gears, bearings, surfaces and guideways. As installation paste for seals, screws, seals, gaskets, etc. Temperature range from -40° to +150° C. Contents...
Content 60 g (€33.17 * / 100 g)
Soldering pad of high heat resistant, asbestos-free material. Accepts pins for holding work pieces whilst soldering. 250 x 250 x 20 mm.
Gauge for gearwheels
Gauge for gearwheels. A simple tool out of 0.3 mm nickel silver sheet for quick finding of a gearwheel module.
Gear wheel puller
Gear wheel puller. Body made of brass, spindle made of steel with 3 hardened spindle centres for axes of 1.0 - 1.5 – 2.0 mm dia. For pulling plastic and metal gear wheels from model motors. Minimum distance between motor and gear wheel 2...
Mini Wheel Puller Z, N, TT, H0
Mini Wheel Puller especially suited for very finde cast model railway wheels with plastic centres, up to 28 mm diameter (Z - N - TT - H0). With spindle point 1.8 Ø standard - for H0.
Piercing saw blades
Piercing saw blades for wood, plastics and soft metals. Length 130 mm. Packed of 12 pcs. Quality for watchmakers, made in Germany. 6 teeth / cm - 0.39 x 1.03 mm 8 teeth / cm - 0.30 x 0.77 mm 10 teeth/cm - 0.25 x 0.58 mm Piercing saw...
Content 12 Stück (€0.25 * / 1 Stück)
From €3.00 *