Materials

Top seller
Federstahlstäbe DIN 17223 poliert (verschiedene Ø) Spring steel bars
From €1.10 *
Hint!
Feder-Bronzedraht Ø 0,3 mm Bronze spring wire (different Ø)
Content 3 Laufende(r) Meter (€0.83 * / 1 Laufende(r) Meter)
From €2.50 *
Close filters
 
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
T-Profile aus Messing
T-Profiles
T-Profiles, brass, milled, l = 500 mm Sizes (h x b) 1 x 1 mm l = 500 mm 1,5 x 1,5 mm l = 500 mm 2 x 2 mm l = 500 mm 2,5 x 2,5 mm l = 500 mm 3 x 3 mm l = 500 mm 3,5 x 3,5 mm l = 500 mm 4 x 4 mm l = 500 mm 4,5 x 4,5 mm l = 500 mm 5 x 5 mm...
From €3.10 *
Zellkautschuk Platten selbstklebend A4 (versch. Stärken)
Cellulose Rubber Sheets
Cellulose rubber sheets, one side selfad-hesive, set of 2 pcs. Measurements: 200 x 100 x 5 mm each. Lightweigth and elastic material especially mounting of motors in model aero-planes, -ships und –engine.
From €5.90 *
Mikro Niete aus Messing mit rundem Kopf für Modellbau
Micro rivets, brass
Micro rivets, made of brass, with round head. These tinies should be soldered or glued from the back. For all measurements of aprox.1:30 to 1:200. Approx. 40 pcs. each pack. shank-Ø: 0,20 mm - head-Ø: 0,30 mm - length: 4,00 mm - not...
From €10.90 *
Sechskantschrauben aus Messing für Modellbau
Hexagon head screws
Hexagon head screws, brass, packet with 10 pcs. each. All sizes in mm. thread M1,0 M1,0 M1,2 M1,2 M1,4 M1,4 M1,6 M1,6 M2,0 M2,0 AF width across flat 1,5 1,5 2,0 2,0 2,0 2,0 2,5 2,5 3,0 3,0 k = height of head 0,8 1,0 1,0 1,0 1,0 1,0 1,2...
Content 10 Stück (€0.32 * / 1 Stück)
From €3.20 *
Messingblech MS 63 halbhart 150 x 200 mm (versch. Stärken)
Brass MS 63
Brass MS 63, half hard 150 x 200 mm
From €7.30 *
Hint!
Neusilber Stangen (Draht gerade gezogen) Hassler Profile NS10
Nickel Silver Wire - Silver Rods Hassler...
Nickel Silver Rods & Rods round, straight drawn as wire Hassler Profile - Type NS10 Now in different diameters buy online in our shop: Ø 0.3 mm, length 500 mm Ø 0.4 mm, length 500 mm Ø 0.5 mm, length 500 mm Ø 0.6 mm, length 500 mm Ø 0.7...
From €2.10 *
Mini Nägel Stahl blank für Modellbau (versch. Längen)
Mini nails
Mini nails, steel shiny with flat head, special sizes; approx. 500 pcs. each pack. Indispensable for model engineering, model ship building and model aeroplane constructions. Different dimensions: 0.70 mm x 10.00 mm (head Ø 2.0 mm -...
From €4.90 *
H-Profile aus Messing
SET: H-Profiles
H-profiles made of brass, milled Packed in transparent plastic tube, variable length (Ø 16 mm) Sizes height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x 0,30 mm - length: 500 mm, 1 piece...
€28.00 *
T-Profile aus Messing
SET: T-Profiles
T-profiles made of brass, milled, Packed in transparent plastic tube, variable length (Ø 16 mm) Sizes height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x 0,30 mm - length: 500 mm, 1...
€25.00 *
U-Profile aus Messing
SET: U-Profiles
U-profiles made of brass, milled, length 500 mm each. Packed in transparent plastic tube, variable length (Ø 16 mm). Profile Sizes in height x width x wall thickness: 1 piece 1,00 x 1,00 x 0,25 mm - length: 500 mm, 1 piece 1,50 x 1,50 x...
€30.00 *
Winkelprofile aus Messing
SET: Angle
Angle profiles made of brass, milled Packed in transparent plastic tube, variable length (Ø 16 mm) different sizes a x b: 1 piece side a: 1,00 mm - side b: 1,00 mm - length: 500 mm - thickness 0,25 mm, 1 piece side a: 1,50 mm - side b:...
€24.00 *
Rundmessing versch. Ø 0,50 bis 6,00 mm
SET: Round rod
Round brass, drawn, length 500mm Packed in transparent plastic tube, variable length (Ø 16 mm) Various diameters: 1 piece 1,00 mm, 1 piece 2,00 mm, 1 piece 3,00 mm, 1 piece 4,00 mm, 1 piece 5,00 mm, 1 piece 6,00 mm.
€15.00 *
Rohre aus Messing
SET: Tubes
Brass tubes, drawn, Packed in transparent plastic tube, variable length (Ø 16 mm) different sizes: Ø 1,00 mm - wall thickness: 0,20 mm - length: 500 mm, Ø 1,50 mm - wall thickness: 0,20 mm - length: 500 mm, Ø 2,00 mm - wall thickness:...
€14.00 *
2 From 2

Materials that set no limits to your creativity.

Bridges can be built, model modifications can be realised with our brass profiles in smallest dimensions and various shapes such as round, square, hexagonal, T, I, H, U and angle profiles, and small details can be reproduced on models. In most cases, the profile is sawn and can be soldered well.

Our brass and bronze sheets are available in thicknesses from 0.1 mm upwards and, depending on the requirements, can be used to make complete locomotives or carriages, for example, and wheel grinders are made of spring hard bronze sheets. The application possibilities are manifold, whether repair or new model building projects, we offer the model maker a selected assortment.

The intended use determines which materials are used. For example, bronze wire is particularly conductive and is preferred for overhead line construction. Spring steel wire is very elastic, it can be used to build small springs and even for jewellery production the stainless design is suitable. Brass and bronze can be bent into various shapes and soldered very well. Silver steel is often used for the manufacture of axles due to its special hardness.

Small brass chains with closed links are also known as anchor chains. Brass chains can be used, for example, to secure loads. Brass grids and fabrics are turned into fences, covers, screens or nets. 

Brass screws and nuts from M1 upwards, as cylinder, countersunk head or hexagonal bolts are indispensable for model makers. Micronuts made of brass, think of Eiffel Tower,"Blue Wonder" or historic models - unthinkable without rivets.

Our wooden profiles are also becoming increasingly popular, for the construction of cargo, bridge constructions, doll's house furniture and the construction of wooden shingles - you certainly have completely new ideas - trust your imagination!

Viewed