Products from MIB Messzeuge
MIB Messzeuge Online Shop
No results were found for the filter!
Marking Gauge, flat version with mm-calibration, chrome-plated and rustless. Range 200 mm. Useful for marking and tracing on flat parts.
Knife straight edge
Knife straight edge, hardened, micro ground and lapped. Length 75mm. For testing surfaces using the light gap method.
Jet gauge with hardened and ground tapered needle, Direct reading 0.1 mm. Range 0-3 mm. For quick and direct measuring of small bores.
Magnetic stand with fine adjustment. Total height 231 mm. Consist of a stand and prismatic magnetic base with on-off lever. Chromed column Ø 12 x 176 mm, M8 Meas.arm Ø 10 x 150 mm Magnetic base 63 x 50 x 55 mm (LxBxH), Magnet force 60 kg.
Dial indicator, measuring capacity 10 mm, 0.01 mm divisions. Outside diam. of bezel 58 mm, shank Ø 8 H6, metal casing, with tolerance marks. Dial face rotatable by outer ring.
Dial caliper, NEW , made of stainless steel, measuring capacity 150 mm, reading 0.01 mm, 1 point round = 1 mm, hardened, 4-way measurements, jaws 40 mm, backside with crew table, DIN 862. In plastic box.
Electronic digital caliper
Electronic digital caliper, stainless, hardened steel. Measuring range 150mm, jaws 40 mm. Reading: 0.01mm / 0.0005", 0 and Reset button, data output, in case.
Baby vernier caliper
Baby vernier caliper of stainless steel, scale satin chromed. Size 0 - 100 mm, nonius 1/20. Jaws 30 mm.
Pocket venire caliper of stainless steel with instantaneous adjustment. Range 150 mm, jaws 40 mm. Venire 1/20 mm and 1/128". Incl. plastic pouch.
Metric feeler gauge
Metric feeler gauge. 13 blades are provided in an integra-ted nickel plated cover. 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.40 - 0.50 - 0.60 - 0.70 - 0.80 - 0.90 - 1.00 mm
Screw pitch gauge
Screw pitch gauge with 52 blades for measuring and identifying of threads on screws and machineparts from M1 upwrds. A comparison table is included. For metric, English, and American threads.
Centre square for model engineering made of...
Centre square for model engineering made of carbon steel, with mm-graduation, scale satin chrome finish for centring of discs and shafts up to 90 mm diameter. Size 100 x 70 mm.
Digital caliper, small
Digital caliper, small, DIN 862, stainless steel, hardened. Measuring range 100 mm, jaws 30 mm. Reading: 0.01mm / 0.0005", 0 and Reset button, in case.
Control square with 2 bevelled edge, black brandes, made of tool steel, hardened, without back, size 75 x 50 mm.
Dial caliper, small
Small dial caliper, stainless steel, hardened, 4-way measurements, dial Ø 32 mm, jaws 30 mm, measuring capacity 100 mm, reading 0.02 = 1/50 mm (1 point round 2 mm) In plastic box.