Personal & expert advice

  Best quality for 45 years

  PayPal, Credit Card & Prepayment

  Secure German Online Shop

Precision Engineering Tools

Close filters
 
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
2 From 7
No results were found for the filter!
Hohlkehlzange
Flat / concave nose pliers
Flat / concave nose pliers for fine wire and silver-smiths work. Box joint, with spring.
€18.90 *
Spezial-Seitenschneider für Federstahldrähte
Special side cutting nipper
Special side cutting nipper, length 130 mm, for cutting our spring wires to max. 1 mm.
€22.50 *
Modellbau-Verdrahtungszange
Wire cutter
Wire cutter for model engineering: Straighten wire, cut wire and isolate it, grasp wire and to set and hoop.
€35.00 *
Sicherungsringzange (gerade Backen)
Circlip Plier, external, straight jaws
Circlip Plier, external, straight jaws, Length 140 mm, for rings 3.0 - 10 mm dia.
€17.00 *
Sicherungsringzange (gewinkelte Backen)
Circlip Plier, external, angled jaws
Circlip Plier, external, angled jaws, Length 125 mm, for circlips 3,0 - 10 mm dia.
€17.90 *
Sicherungsringzange mit Stellschraube (gerade Backen)
Grip Retainingring Plier, straight jaws
Grip Retainingring Plier, straight jaws, Length 140 mm, for rings 1,5 - 4 mm dia, fitted with adjusting screw.
€28.00 *
Spezial-Seitenschneider für Kunststoffteile
Special side cutter without bevel
Special side cutter without bevel. 125 mm long with spring tension action, insulated grips. For the clean cutting of plastic parts. Not be used for other purposes.
€15.00 *
Seitenschneider
Diagonal cutting nipper
Diagonal cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
€19.90 *
Vornschneider
Straight cutting nipper
Straight cutting nipper, length 115 mm for brass wire up to 0.8 mm, mid steel wire up to 0.5 mm.
€22.50 *
Schräg-Vornschneider
Oblique cutting nipper
Oblique cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
€22.50 *
Quetschzange
Pliers for squashing small rivet heads
Pliers for squashing small rivet heads of mild iron, copper, aluminium. 120 mm long.
€18.90 *
Flachzange
Flat nose pliers
Flat nose pliers, length 115 mm, smooth jaws, without cut
€17.90 *
Rundzange
Round nose pliers
Round nose pliers, length 115 mm with strong tips
€17.90 *
Spitzzange gerade mit glatten Backen
Snip nose pliers smooth jaws
Snip nose pliers, length 115 mm, smooth jaws, without cut
€17.90 *
Spitzzange gebogen mit glatten Backen
Snip nose pliers curved smooth jaws
Snip nose pliers, curved, smooth jaws, without cut
€17.90 *
SET: Sechskant-Steckschlüssel im Ständer (6-teilig)
Nut Driver Set for hex nuts
Nut Driver Set for hex nuts, 6-pcs., chrome-vanadium steel. Ideal for high-precision work with electro-technical and precision components. Spanner size 2.5 - 3 - 3.2 - 3.5 - 4 - 5 mm.
€63.00 *
SET: Schraubendreher im Ständer (6-teilig)
Screwdriver Set with stand
Screwdriver Set with stand consisting of: Slit 1,5 - 2 - 2,5 - 3 mm, Phillips 00 - 0. High quality chrome-vanadium-molybdenum steel, ideal for high-precision work.
€39.90 *
Uhrmacher-Festhalteschraubendreher
Watchmaker screw-holding screwdriver
Watchmaker screw-holding screwdriver for screws up to M 3. length 120, width of blade 1,6 mm.
€24.90 *
Pinselwäscher
Brush Washing Set
Brush Washing Set consists of a glass wit top and a metal sieve inset. When washing your brushes the old colour will not be stirred up again under the sieve inset. Made in Asia.
€9.90 *
Reinigungsbürste für Feilen
File cleaning brush, brass
File cleaning brush, brass. A very good result will be achieved by use with cleaning petroleum.
€3.90 *
Radierer mit Glashaarpinsel - Durchmesser 4 mm
Glass fibre burnishing tool, 4 mm Ø
Glass fibre burnishing tool with plastic handle and glass fibre refill (4 mm Ø). Length 120 mm.
€5.50 *
Glass fibre refill, 4 mm Ø
Glass fibre refill, 4 mm Ø
Glass fibre refill, 4 mm Ø
From €0.80 *
kleine Bügelsäge
Small fretsaw
Innovative vario sawframe, length 260 mm, made of 10 x 5 mm barrel galvanized flat steel. With a progressively adjustable fixture and glass balls reinforced plastic handle. High 65 mm cutting space. Fitted with a saw blade for...
€8.90 *
Schienensäge für Modellbahngleise
Rail Saw
Rail Saw, blade 140 mm long, 0.3 mm thick, finest tooth (20 teeth/cm), for sawing model rails, gauge Z, N, TT, H0, 0. Also for profiles of brass, wood and plastics.
€12.50 *
Ersatzsägeblatt für Schienensäge
Saw blade without handle
Saw blade 140 mm x 32 mm, 0.3 mm thick, 20 teeth/cm. Without handle.
€7.50 *
Piccolo Schneidlade (Gehrungslade)
Piccolo-mitre box
Piccolo-mitre box out of robust aluminium profile, a = 30 mm, b = 40 mm, c = 180 mm. With stepless adjustable tigh-tening element, with beating flange and removable wooden inset.
€9.90 *
PUK Metall-Feinsägeblätter
Hacksaw blade
Hacksaw blade, finest tooth (20 teeth/cm), packed of 3 pcs. Professional-quality saw blades with wavy-set, sharp theeth, specially hardened and tempered, with pins. Size: 6 mm x 0.4 mm Length: 150 mm For high quality precise cuts:...
Content 3 Stück (€1.30 * / 1 Stück)
€3.90 *
Schmierfett - Fettstift - Schneidfett
Cutting- and lubrication grease
Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content 350 g (€5.69 * / 100 g)
€19.90 *
Glue 'n' Glaze Klebstoff
Glue 'n' Glaze
Cyanolit 102. Thin and quick setting adhesive on methy-cyanacrylate base. Suitable for gluing all metals as well as for complicated exact fitting units. Pipette of 2 grms. Please store in a cool place!
Content 50 ml (€16.00 * / 100 ml)
€8.00 *
SET: Spatel (4-teilig)
Set of Spatula
Set of Spatula, 4 different sizes out of stainless steel for stirring, mixing, application fillers, forming. Made in Asia. Length 160 mm.
€14.00 *
Doppelspatel
Double ended Spatula
Double ended Spatula, steel, nickel plated, 180 mm. A universal tool for stirring, mixing, application fillers, forming.
€5.50 *
Stahlwolle zum Schleifen und Polieren
Steel wool
Steel wool, produced from specially tough steel wire, rolls of 200 g each. Optimal for grinding and polishing of wood and plastics. Steel wool is more suitable than grinding paper: No scratching marks and no clogging up.
€4.50 *
Mikro-Schleifpapier
Micro Abrasive Paper
Micro Abrasive Paper for wet and dry grinding. 1 sheet grinding paper each grain 1000, 1200, 1500, 2000. Eeach 230 x 280 mm. For grinding of metal, wood, plastics.
€4.90 *
SET: Rundlocheisen
Set of belt punches
Set of belt punches, 6 punches 1-2-3-4-5-6 mm diameter.
€12.90 *
Splintentreiber Satz (4-teilig)
Sleeved pin punches
Sleeved pin punches, 4 pcs., hardened. 0.9 - 1.4 - 1.8 - 2.4 mm Ø.
€19.90 *
Innendrehstahl aus Spezialstahl
Internal turning tool made of special steel
Internal turning tool, round, made of particularly hard special steel including brass insert for secure clamping. Diameter: 2,00 mm Diameter: 4,00 mm
€23.00 *
Tungsten tip, for refill
Tungsten tip, for refill
Tungsten tip, 1 piece, for refill, for our tourning tools 41617 to 41719.
€10.90 *
Replacement screw Torx T8
Replacement screw Torx T8
Replacement screw Torx M2.5 x 5 / T08 made of special steel for turning tools with tungsten tip.
€5.30 *
Wendeplättchen für Drehstähle (geschliffen)
Tungsten Tips
Tungsten tips, ground model, for our tourning tools 41617 to 41719. With these tungsten tips you can achieve an especially fine surface.
€12.90 *
Wendeplättchen für Messing & Stahl
Tungsten tip for brass
Tungsten tip (right 7°, 1.0 mm) for refill for brass for no. 41623-M.
€37.00 *
Replacement screw torx T9
Replacement screw torx T9
Replacement screw torx T9 made of spezial steel for no. 41623-S and 41623-M.
€3.90 *
Abstechstahlhalter für Stahl
Cutting tool holder - brass
Cutting tool holder with tungsten carbide tip 1mm for cutting brass. Size 6 x 8 x 55mm.
€59.00 *
Treibriemensatz für UNIMAT
Set of drive belts for UNIMAT
Set of drive belts for your UNIMAT 3+4. Set consists of 2 drive belts ZOR 50 6333, 2 drive belts ZOR 50 6336, 1 drive belt ZOR 50 6222.
€6.90 *
Unterlags-Folienband
Pad foil band
Pad foil band (4 pcs.), 13 mm wide each and about 200 mm long, thickness 0.1 – 0.2 – 0.5 – 1.0 mm. Foil bands are for example used for aligning of turning tools in tool holders. According to capacity of your tool holder 3 - 4 tool pads...
€6.70 *
Tischbohrmaschine (Spann-Ø = 1,00 - 3,20 mm)
Table drill machine
Table drill machine with tail-spindle feed and ball-bearing spindle. 3 spindle speeds by changing the drive belt. Motor 220-240 Volts, 85 Watts. Spindle speed 1800 - 4700 and 8500 rpm. Including 6 collets, capacity 1.0 - 3.2 mm.
€179.00 *
Bohrfutter für Tischbohrmaschine (Ø = 0,50 - 6,00 mm)
Chuck for table drill machine
Chuck for table drill machine, capacity 0.5 - 6 mm, incl. chuck key.
€10.50 *
SET: Mini-Maulschlüssel
Set of mini open-ended spanners
Set of mini open-ended spanners with follo-wing sizes: 2.5 x 3.2 mm; 3 x 3.5 mm; 3.5 x 4.5 mm, 4 x 5 mm; 5 x 5.5 mm. Made in Germany.
Content 5 Stück (€6.58 * / 1 Stück)
€32.90 *
SET: Doppelmaulschlüssel dünne Ausführung
Set of open ended spanner
Set of open ended spanner, extra thin shanks, pressed from chrome-vanadium. Milled mouths. Hardened and nickeled, in plastic wallet. Sizes 3 x 3.5; 4 x 4.5; 5 x 5.5; 6 x 6.5; 7 x 8; 9.x.10 mm. Lengths 125 mm. Made in Germany.
Content 6 Stück (€5.48 * / 1 Stück)
€32.90 *
2 From 7

High-quality tools for your precision mechanical work.

You certainly know the quotes "Good tools are half the job", as well as "He who buys cheap buys twice". Only with high-quality tools can you succeed in your project. The usual commercially available tools are oversized for your precision mechanical work? Then you've come to the right place at fohrmann-WERKZEUGE! For your detailed work you will find the perfect small tools and specially manufactured model making tools. 

You can rely on us for this - whether in the construction of flight models, ship modeling, model railroading or functional modeling. If you want to build, rebuild or repair trucks and RC cars and need the perfect tool for improvements. You will also find the right products in our assortment to restore old locomotives, supermarkets, improve and tune models.

 

Attention to detail - working smoothly with good equipment.

You can rely on our tools to implement your planned project without any problems and delays! You like to do handicrafts in your hobby for your life, fold origami, cut paper or assemble kits - so you always need a sharp knife (precision knife or scalpel), a cutting mat for a good substrate as well as a steel scale for correct measurements. If you have to remove a burr, this works best with our filing range and the grinding rod.

 

Brass model kits and electrical connections soldered perfectly.

For a successful electrical connection, good equipment is the prerequisite for success. The soldering pad protects your workstation from damage. To best prepare the parts to be soldered, use our glass hair eraser. This enables you to achieve surfaces free of corrosion, dirt and grease.

Depending on the material to be soldered, you will need soldering grease as a flux for the installation of LEDs and for circuit board construction. On spring steels, however, soldering oil is used.

When brazing with flame, you can use solder pins and hooks to fix your parts perfectly on the ceramic plate to achieve the desired result. For this purpose, you will need not only the burner but also the appropriate flux and, of course, silver solder as a paste or stick.

 

Use tweezers and pliers to extend your hand.

Cutting, gripping and holding parts - there is always the ideal instrument for every special application. For example, there is no side cutter for everything. Whether you want to cut a thin brass, copper or steel wire, you need a special side cutter depending on the material. Parts made of plastic kits should also not be crushed (so-called wade-free side cutters).

 

Prototypes in the craft and industrial production.

As an engineer, developer and university designer, prototyping is a proven method for producing detailed models. For the perfect production on a small scale you need smaller special tools. With our products you can realise your big ideas.

 

Your own workshop - your own tools.

Only with good and complete equipment can you have the basis for the smooth and successful implementation of your projects, ideas and wishes. Create your own individual design. Be creative. We support you in every detail with the perfect tools - rounded off to the needs of the filigree sector. For model makers. For hobbyists. For everyday work and hobbies.

Viewed