Top seller
No results were found for the filter!
Pin vice (Ø = 0,10 - 1,00 mm)
Pin vice, 75 mm long, capacity 0.1 to 1.0 mm with small head for holding small drills and taps.
€6.40 *
Pin vice (Ø = 0.3 - 1,20 mm + 1,30 - 2,30 mm)
Pin vice with knurled brass handle, totally hollow throughout with screw head and 2 hardened collet chucks. Capacity 0 - 1.0 and 1.5 - 2.3 mm. Usable for holding little drills, taps and for our 100 mm needle files.
€7.90 *
Small Hand Drill
Small Hand Drill. Drill mount with knurled aluminium handle, freely rotating hand rest and three jaws chuck, capacity 0.4 - 3.2 mm.
€24.90 *
Scalpel
Scalpel, resilient chromium plated handle. The blades are replaceable. Encl. 1 scalpel blade No. 54 013.
€7.90 *
Precision knife
Precision pen knife from Japan. Can be used with interchangeable, extremely sharp 30° and 45° blades or special steel needle. 2 x 5 blades supplied with knife. When not in use, the tools are kept inside the holder, pen shape, length 145 mm.
€26.90 *
Set of fine milling cutters
Set of fine milling cutters, 5 pcs. of following forms: ball - wheel - cone - taper - cylinder. Head diameter 2.3 mm, shank diameter 2.34 mm. For working on non-iron metals, wood and plastics.
€7.90 *
Burnishing tool for engines
Burnishing tool for engines. Replaceable burnishing pin made of flexible plastic containing fine grained grinding powder. Holder holds burnishing pin by a collet chuck. Suitable for all mini drills. Length 55 mm and shank 2.34 mm.
€6.90 *
Set of cutting discs
5 discs of 13-16-19-22-25 mm Ø, each 0.1 mm thick, for wood and plastics. Without mandrel. They are put on with the help of our mandrel no. 55160 in all mini drill machines.
Content 5 Stück (€2.98 * / 1 Stück)
€14.90 *
Milling cutters stand
Milling cutters stand, made of plastic with approx. 700 combinations. For storing milling tools, drills, grinders polishing tools etc. with 2.34 mm shanks. Delivery without tools. Measurement 125 x 78 mm.
€7.90 *
Miniature brushes with Scotch Brite
Miniature brushes with Scotch Brite™ 3 pcs.: fine - medium - coarse, Ø 25 mm; shank Ø 2.34 mm. Rust and dirt can be easily removed.
€8.90 *
Brush of abrasive nylon
Brush of abrasive nylon for removing old paint layers on metal models. Shank 2.34 mm Ø.
€5.90 *
Silver solder
Silver solder, soldering temperature 650 deg. C. For hard soldering brass, copper and hard materials. Supplied in lengths 1 x 500 mm.
€5.20 *
Tip tinner cleaner
Tip tinner cleaner, lead-free , for quick and simple cleaning and tinning of oxidised tips. The heated tip has to be simply pushed along the surface of cleaner. Contents 15 g.
Content 15 g (€46.33 * / 100 g)
€6.95 *
Holder for soldering iron
Holder for soldering iron, with metal foot and litt-le sponge. Nickeled double spiral for holding soldering irons up to 80 Watts. Weight about 365 g. Made in Asia.
€5.90 *
Soldering pad
Soldering pad of high heat resistant, asbestos-free material. Accepts pins for holding work pieces whilst soldering. 245 x 245 x 20 mm. Supplied without soldering tool.
€18.90 *
Soldering plate
Soldering plate made of heat resistable ceramic material. A great number of holes means a very low thermal resistance. You can also put steel pins into the holes to fix your work part on the soldering plate. Dimensions 197 x 140 x 13mm....
€27.90 *
Steel pins
Steel pins, 1,3 x 16 mm for fixing work parts on our soldering plate 61022. Box with about 50 pins.
€4.90 *
Flux for silver solder
Flux for silver solder. Flux is generally used to dissolve and remove oxide films from soldering surfaces and to avoid further oxidation while hard soldering. Shake well before use. Cont 100 g.
Content 100 g
€10.70 *
Cooling paste
Cooling paste, re-usable. Prevents heat spreading in material and facilitates soldering and welding next to glass, rubber, plastics, wood as well as painted surfaces without dismantling. Put about 10 mm thick paste near to soldering...
Content 50 g (€15.00 * / 100 g)
€7.50 *
Micro-Piezo gas torch
Micro-Piezo gas torch, for soldering, hard and soft. Uses normal cigarette lighter butane gas fuel. Adjustable flame and temperature: max. 1300° C.
€43.90 *
Replacement soldering tip
Replacement soldering tip, 4.5 mm, internally heated, pencil shape, fits No. 61 151.
€3.50 *
Soldering station ST 201
Even having to cope with modern demands - ever smaller construction parts, separation dangerous mains voltage - you work at your ease with this compact unit. Contents: Soldering station ST 201, Soldering iron 24 V / 20 W, 2 soldering...
€71.90 *
Soldering tip set
Soldering tip set 3 piece, 4 mm, pencil shape, wedge shape and chisel shape, fits No. 61 300.
€5.80 *
Soldering station ST 301
Soldering station ST 301. Even having to cope with modern demands ever smaller construction parts, separation dangerous mains voltage you work at your ease with this compact unit. Contents: Soldering station ST 301, Soldering iron 12 V /...
€59.90 *
Holder for saw blades (hole 8 mm)
Holder, shank 8 mm for our saw blades No. 28 302 - 28 130 with hole 8 mm.
€23.00 *
Mini cutting board
Mini cutting board for exact cutting of small profiles up to 5 x 5 mm. Precut guides for cutting angles of 30, 45 and 90 degrees. All metal con-struction. Will accept all saw blades up to 0.5 mm. For sawing metal profiles we recommend...
€62.90 *
Vee-block for drilling
Vee-block for boring out of wood, size 120x55x55 mm. Boring of round material, especially of pipes is always a problem for the model engineer. Often the surface of round material. Is damaged while being held in a vice; pipes are pressed...
€13.50 *
Die holder (aluminium)
Die holder, 32 mm Ø, aluminium, for all dies M 1 - M 2,6 Ø (= 16 mm Ø). Because of low weight special sensitive work possible.
€14.90 *
Tap wrench aluminium M1 - M3
Tap wrench, 32 mm Ø, aluminium, for hand taps M 1 - M 3. Tap is held by a pressure screw.
€14.90 *
Small parting tool holder
Small parting tool holder (idea: Detlef Beier). Measurements 6 x 6 x 65 mm including thin, just 0.5 mm wide parting-off-blade for soft metals. One side with straight cut for brass, other side with curved cut for soft steel, alu-minium...
€25.90 *
Hint!
Oil for drilling and cutting
Oil for boring and cutting. Special oil for drilling, milling, sawing, turning, tapping, grinding. For all types of steel, all types of castings, alu-minium, all types of stainless steels, copper, red cast, and brass. Cont. 120 ml.
Content 120 ml (€6.25 * / 100 ml)
€7.50 *
Soldering Hook
Soldering Hook (1 pcs.) for fixing work parts on our soldering plate No. 61022.
€9.95 *
Airbrush cleaner
Airbrush cleaner. Eliminates rests of colour and lubricates the mechanism of the airbrush without causing damage. 85 ml
Content 85 ml (€4.82 * / 100 ml)
€4.10 *
Reverse action tweezers for soldering 160 mm
Reverse action tweezers, with heat resilient handle to 100° C for soldering. Length 160 mm.
€9.90 *
MICROMOT 60 E
Minidrill MICROMOT 60/E, for milling and drilling, electronic speed control from 5,000 - 20,000 rpm, stable housing of fibreglass, with steel collets in sizes 1.0-1.5-2.0-2.4-3.0-3.2 mm. MICROMOT -Transformer is necessary. 12V DC, 40 W....
€36.00 *
Flexible Drive Proxxon Micromot 110 BF
Flexible Drive 110/BF extremely flexible, triple ball bearing system, with quick-action chuck of 0.3-3.2 mm. Total length 100 cm. For maximum speed of 25,000rpm.
€30.90 *
Transformer Proxxon Micromot NG 2 E
Transformer NG 2/E with electronic speed control. 220-240 V, capacity of 2.0 A at 12 V under load, weight 1 kg.
€38.50 *
Universal Holder UHZ
Universal Holder with ball and socket, easily and securely to be fitted to a workbench or table (max. 60 mm) top by means of a wing nut. For MICROMOT.
€33.90 *
MICRO-Fräse MF 70
Proxxon MICRO-Fräse MF 70 , stabiler Maschinenfuß aus Grauguss, Vertikalführung und Kreuztisch aus hochfestem Aluminium (oberflächen-verdichtet). In allen Achsen spielfreie, nachjustierbare Schwalbenschwanzführung. Auslegergehäuse aus...
€325.00 *
Viewed