Drill bits & Reamer

Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Hint!
HSS Bohrer geschliffen DIN 338
HSS-drills DIN 338
HSS-drills DIN 338 for wood and metal, drill-Ø = shank-Ø. Made in Germany.
From €0.90 *
HSS- Spirec drills  (shank-Ø = 2,34mm)
HSS- Spirec drills (shank-Ø = 2,34mm)
HSS- Spirec drills, for wood and metal. Especially good concentric running qualities for precision drilling.
€2.50 *
Stiftenklöbchen mit Spannzangen (Ø = 0 - 1,00 mm + 1,50 - 2,30 mm)
Pin vice (Ø = 0 - 1,00 mm + 1,50 - 2,30 mm)
Pin vice with knurled brass handle, totally hollow throughout with screw head and 2 hardened collet chucks. Capacity 0 - 1.0 and 1.5 - 2.3 mm. Usable for holding little drills, taps and for our 100 mm needle files.
€7.00 *
Stiftenklöbchen (Ø = 0,10 - 1,00 mm)
Pin vice (Ø = 0,10 - 1,00 mm)
Pin vice, 75 mm long, capacity 0.1 to 1.0 mm with small head for holding small drills and taps.
€5.50 *
HSS- Spirec drills (shank-Ø = 1,00mm)
HSS- Spirec drills (shank-Ø = 1,00mm)
HSS- Spirec drills, for wood and metal. Especially good concentric running qualities for precision drilling.
€5.40 *
SET: Reibahlen - 5-kantig
Set of cutting-broaches
Set of cutting-broaches, 5 flutes, conical, out of tool steel with plastic handles. For deburring, reaming and enlargement of drill holes in thin material. Set of 6 pcs. 0.4 – 1.4 mm Ø
From €13.00 *
Bohrer-Klöbchen (Ø 0,40 - 3,20 mm)
Small Hand Drill
Small Hand Drill. Drill mount with knurled aluminium handle, freely rotating hand rest and three jaws chuck, capacity 0.4 - 3.2 mm.
€18.50 *
Spiralbohrerbox (leer)
Twist drill box empty
Twist drill box empty. Takes 10 drills up to 2.2 mm Ø. A clear plastic box with a sliding lid, enabling the drills to be removed sepa-rately. Size approx. 110 x 60 x 9 mm.
€2.50 *
Hint!
Bohr- und Schneidöl
Oil for drilling and cutting
Oil for drilling and cutting. Special oil for drilling, milling, sawing, turning, tapping, grinding. For all types of steel, all types of castings, alu-minium, all types of stainless steels, copper, red cast, and brass. Cont. 120 ml.
Content 120 ml (€5.00 * / 100 ml)
€6.00 *
Stiftenklöbchen (Ø = 0 - 3,20 mm)
Pin vice (Ø = 0 - 3,20 mm)
Pin vice with knurled brass handle, nickel plated, with revolving hand plateau light metal, with screw head and 2 hardened double-side collet chucks for reception of small drills. Length 105 mm, capacity 0 – 3.2 mm. Made in Asia.
€5.50 *
Reibahle - Kegel 1-5 mm
Micro Drill Reamer
Micro Drill Reamer for enlarging holes in sheet material. Right sided flutes, range 1 to 5 mm. Length 30/125 mm.
€29.90 *
Spiralbohrerbox SET
Twist drill set with 10 HSS drills
Twist drill set with 10 HSS drills DIN 338. Supplied in a clear plastic box with a sliding lid, enabling the drills to be removed separately.
From €10.50 *
Drillbohrer (Ø = 0 - 1,00 mm)
Archimedean drill
Archimedean drill, capacity 0 – 1.0 mm.
€9.90 *
Reibahlen - zylindrisch (knapp unter Maß zum aufpressen)
Reamer cylindrical
When fitting wheels, bushes, gears and flywheels, it is necessary to keep the bore below the dia of the axle in order to obtain a firm fit. In order to obtain the "pressure fit" it is essential that a precision table drilling machine or...
€24.90 *
HSS Messingbohrer DIN 338 RH
Drill for brass HSS Ø = 1.4mm
Drill for brass HSS, also used for plastics, drill-Ø = shank-Ø = 1.4mm
€1.50 *
Holzbohrer mit Zentrierspitze
Wood working drill with centre point
Ideal for drilling the holes for signal drives. Shank - Ø 8 mm. 12 mm Ø 13 mm Ø
€5.70 *
Reibahlen - zylindrisch
Reamers, cylindrical
Cylindrical reamers, HSS to DIN 212, especially for reaming and after drilling of holes, of which exact fit is important.
€24.90 *
Zentrierbohrer DIN 333
Centre drills 0.50 mm Ø, shank 3.15 mm
Centre drills 60 degrees right 0.50 mm Ø, shank 3.15 mm.
From €4.90 *
SET: 10x HSS Spiralbohrer geschliffen (Spirec) in Box
Twist drill set of 10 HSS-Spirec drills
Twist drill set of 10 HSS-Spirec drills with shank diam. 2.34 mm (0.3 and 0.4 mm foret with shank 1.00 mm). Supplied in a clear plastic box with a sliding lid, enabling the drills to be removed separatel. HSS-Spirec drills, for wood and...
€29.90 *
Schnellspann-Bohrfutter
Automatic drill chuck
Automatic drill chuck, M 8 x 0.75
From €7.50 *
Feinbohr-Vorsatz (Ø = 0,40 - 3,20 mm)
Mini drill front part
Mini drill front part for work with mini drills and mini milling cutters on milling and drilling machines. Tool consists of a C 6.3 mm shank and a drill chuck, capacity 0.4 – 3.2 mm. Can be changed against bigger drill chuck.
€10.90 *
Bohrprisma
Vee-block for drilling
Vee-block for drilling out of wood, size 120x55x55 mm. Boring of round material, especially of pipes is always a problem for the model engineer. Often the surface of round material. Is damaged while being held in a vice; pipes are...
€11.50 *
Handbohrgriff (Ø = 0,50 - 6,50 mm)
Hand vice
Hand vice with hollow wooden handle and hollow spindle, capacity 0.5 – 6.5 mm. Total length 155 mm, robust quality.
€17.40 *
Bohrfutter für Tischbohrmaschine (Ø = 0,50 - 6,00 mm)
Chuck for table drill machine
Chuck for table drill machine, capacity 0.5 - 6 mm, incl. chuck key.
€11.50 *
Tischbohrmaschine (Spann-Ø = 1,00 - 3,20 mm)
Table drill machine
Table drill machine with tail-spindle feed and ball-bearing spindle. 3 spindle speeds by changing the drive belt. Motor 220-240 Volts, 85 Watts. Spindle speed 1800 - 4700 and 8500 rpm. Including 6 collets, capacity 1.0 - 3.2 mm.
€175.00 *
SET: 41x HSS Spiralbohrer mit Kunststoff-Ständer
Twist Drill Set with plastic stand
Twist Drill Set with plastic stand. 41 pcs. HSS quality drills DIN 338 from 1.0 to 5.0 mm, in steps of 0.1 mm.
€31.90 *
Viewed