Top seller
No results were found for the filter!
Mini Etched Sheet Bender Mini Etched Sheet Bender, for photo-etched parts to 0.5 mm. Size 105 x 105 mm. Without accessories.
€94.90 *
Hint!
Engine grease B 52 Engine grease B 52 , a very soft metal soap grease for model railways, with little oil giver and marrow of sunflowers for cleaning the oil giver. Contents 7 g. [Link to the manufacturer]
Content 7 g (€28.43 * / 10 g)
€19.90 *
BR type compressed air BR type compressed air, 200ml can, removes fine dust. Strong pressure, no residues, clean, easy to handle, non-corrosive. For cleaning and dusting of electronic components, casings and modules even in hard-to-reach locations.
Content 200 ml (€4.95 * / 100 ml)
€9.90 *
Pliers Stand Pliers Stand, made of wood for holding approx. 10 watchmaker's pliers. Pliers are cleary kept and can be easily removed. Delivery without pliers.
€14.90 *
Assembly magnifier Assembly magnifier, 10 x magnifying, adjustable sharpness, on chromium-plated tripod. An indispen-sable tool for assembling fine and small units.
€22.90 *
Head band magnifier with LED Head band magnifier with LED spotlight with four lenses: 1,2x (520-620mm)/ 1,8x (230-320mm)/ 2,5x (150-250mm)/ 3,5x (80-120mm) magnification. Deposit box for 4 lenses and cleaning cloth, incl. 2 batteries AAA 1.5 V. Head band is...
€24.90 *
Dust brush Dust brush with plastic handle and white bristles, specially for cleaning machines. Length 150 mm. Made in Asia.
€3.90 *
Brush for machines Brush for machines, small light handy-brush for removing of chips from machines after drilling, turning, milling. 170x25x65 mm.
€11.90 *
Cutting- and lubrication grease Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content 350 g (€9.14 * / 100 g)
€32.00 *
Mini automatic centre punch - spare punch point... Spare punch point for mini automatic centre punch, only for the older version 40134.
€5.90 *
Small centre punch Small centre punch with fine tip, hardened and nickel-plated. Length 80 mm, diameter 6 mm.
€5.90 *
Vice for table drill machine Vice for table drill machine made of aluminium cast. Max. capacity 34 mm.
€17.90 *
Ultrasonic cleaning bath Ultrasonic cleaning bath for thorough cleaning of components, gearboxes and optical glasses etc. Stainless steel bath 600 ml, oval 150 x 95 x 50 mm. Built-in auto timer 3 min. Recommended cleaning solution our SR 24 Model train oil No....
€47.90 *
Plastic Spring Clamps Plastic Spring Clamps, 3 pcs., coloured assorted, length 60 mm, opening of jaws max. 20 mm.
€4.90 *
Ratchet tool holder Ratchet tool holder switchable for right and left operation, made of chrome plated steel. For example used for holding hand thread drills M 3 to M 10.
€11.90 *
Ring Clamp Ring Clamp, spring looted self opening version with side locking screw and leather lined jaws. Made of wood. In model engineering for holding fine parts or castings for dressing / finishing work.
€20.90 *
Scissors Clamps Scissors Clamps. Made of stainless steel with fine serrations. Length 140 mm. Great help for adhesive works in model engineering.
€8.90 *
Workholder Workholder, Ø 50 mm, length 130 mm. Holds round and irregulary formed works by 8 re-stickable steel pins. Robust metal holder with wooden handle. Max. capacity 20 mm.
€15.90 *
Precision-Vice Precision-Vice, made of die-cast zinc. With ball joint to be rotated and swivelled in all directions and clamp for quick and secure fastening to workbenches and table tops up to 60 mm thickness. Alternatively , it can also be fixed to...
€47.50 *
Vice for precision engineering Vice for precision engineering, its head rotates a full 360 de-grees and tilt 180 degrees from vertical to horizontal. Can be attached instantly and securely to any smooth surface. Jaw width of 75 mm and clamping size of 70 mm.
€47.50 *
Small vice Small vice out of metal with plastic pins for holding round and square working units of 12-60 mm Ø. Small vice with working unit can be held by a larger vice for better holding. Made in Asia.
€13.90 *
Miniature Machine Vice Miniature machine vice with adjustable stop, suitable for clamping of very small model building components. Stepped vice jaws, with groove in base for receiving a sliding block. Body and accurately controlled sliding jaw made of grey...
€269.00 *
Machine vice Machine vice with adjustable stop, suitable for clamping of model building components. Stepped vice jaws, with groove in base for receiving a sliding block. Body and accurately controlled sliding jaw made of grey cast iron. Dimensions...
€295.00 *
Milling cutters stand Milling cutters stand, made of plastic with approx. 700 combinations. For storing milling tools, drills, grinders polishing tools etc. with 2.34 mm shanks. Delivery without tools. Measurement 125 x 78 mm.
€7.90 *
Screw assortment box, empty Screw assortment box with transparent plastic hinged lid. Ideal for storage screws, nuts and very small parts. Measurements: 207 x 112 x 23 mm. 36 compartments 15 x 33 x 18 mm each. Delivery as empty box.
€9.95 *
Angle gauge Angle gauge for measurements from 0-180 degrees. Diameter of protector 80 mm, Length of blade 120 mm.
€20.90 *
Marking Gauge Marking Gauge, flat version with mm-calibration, chrome-plated and rustless. Range 200 mm. Useful for marking and tracing on flat parts.
€29.90 *
Small Square Small Square, without back, made of 1mm strong steel sheet, nickel-plated. Measurements: 110 x 55mm.
€5.50 *
Knife straight edge Knife straight edge, hardened, micro ground and lapped. Length 75mm. For testing surfaces using the light gap method.
€19.90 *
Micro centring angle Micro centring angle, for centring of discs and shafts. Length 55 mm, 5 gms. Small batch production.
€52.90 *
Magnetic stand Magnetic stand with fine adjustment. Total height 231 mm. Consist of a stand and prismatic magnetic base with on-off lever. Chromed column Ø 12 x 176 mm, M8 Meas.arm Ø 10 x 150 mm Magnetic base 63 x 50 x 55 mm (LxBxH), Magnet force 60 kg.
€32.90 *
Dial indicator Dial indicator, measuring capacity 10 mm, 0.01 mm divisions. Outside diam. of bezel 58 mm, shank Ø 8 H6, metal casing, with tolerance marks. Dial face rotatable by outer ring.
€33.00 *
Proportional divider Proportional divider. This tool is used for copying drawings on an enlarged or reduced scale, dividing lines and circles into equal parts, quick and exact solving of difficult measurement problems, finding distances on maps without scale...
€95.00 *
Model engineering assembly square Model engineering assembly square (idea: Jürgen Lange) with three steps for fastening. To be used for vertical soldering, sticking, assembling of sheets or metal strips. Measurements 65 x 30 x 5 mm. Delivery 1 piece without screw clamp....
€4.70 *
Dial caliper Dial caliper, NEW , made of stainless steel, measuring capacity 150 mm, reading 0.01 mm, 1 point round = 1 mm, hardened, 4-way measurements, jaws 40 mm, backside with crew table, DIN 862. In plastic box.
€59.90 *
Electronic digital caliper Electronic digital caliper, stainless, hardened steel. Measuring range 150mm, jaws 40 mm. Reading: 0.01mm / 0.0005", 0 and Reset button, data output, in case.
€44.90 *
Baby vernier caliper Baby vernier caliper of stainless steel, scale satin chromed. Size 0 - 100 mm, nonius 1/20. Jaws 30 mm.
€34.90 *
Pocket venire Pocket venire caliper of stainless steel with instantaneous adjustment. Range 150 mm, jaws 40 mm. Venire 1/20 mm and 1/128". Incl. plastic pouch.
€29.90 *
Gauge for gearwheels Gauge for gearwheels. A simple tool out of 0.3 mm nickel silver sheet for quick finding of a gearwheel module.
€5.90 *
Metric feeler gauge Metric feeler gauge. 13 blades are provided in an integra-ted nickel plated cover. 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.40 - 0.50 - 0.60 - 0.70 - 0.80 - 0.90 - 1.00 mm
€3.90 *
Screw pitch gauge Screw pitch gauge with 52 blades for measuring and identifying of threads on screws and machineparts from M1 upwrds. A comparison table is included. For metric, English, and American threads.
€8.50 *
Carbide pointed scriber Carbide pointed scriber. Steel scriber with carbide tip. Length 145 mm.
€4.90 *
Small steel scriber Small steel scriber with fine, hardened point and aluminium handle. Length 125 mm approx.
€6.90 *
Steel scriber with one straigt and one right... Steel scriber, with one straigt and one right angledpoint. Knurled handle. Length: 250 mm.
€5.50 *
Book: Materialien für den Modellbau Materialien für den Modellbau. In german language only.
€15.00 *
Measuring and testing - the be-all and end-all in model making.
For length measurement we offer stainless steel rulers in various lengths with etched ruler. Scale rulers for H0, TT and N complete the range. Calipers analogue or digital are the adjustable alternative. With our special gauges you can check the module of a gear wheel - the gear wheel gauge or also the module gauge, with the gauge gauge the gauge gauge the gauge is checked. Different angles, with or without stop, centring angle and marking tools complete our assortment. For correct results, it is important to keep these instruments clean and carefully stored. The application should be carried out at 20°C and scales should always be read with a right-angled line of sight.
The right perspective for precision work.
The models you work on are getting smaller and more precise. Details should be reproduced as precisely as possible - hardly any model builders will be able to get around an additional magnification aid. The headband magnifier gives you a choice of lenses that can be adapted to your specific needs and, thanks to LED's, bright light in the right place. The lens of the magnifying lamp makes it easy to work underneath. Good magnification and bright illumination of the working area without shadows are indispensable when maximum precision is required.
Order is half life.
If the search for certain small parts is unsuccessful and you cannot find the right one, then you will find a suitable assortment box for screws, nuts or rivets. Drills can be stored separately in the drill box or drill stand according to size and can be removed individually if necessary. Your brass profiles can be stowed away in the plastic tube and do not bend. Order saves time, because you can't have enough of it for your hobby.
Consult specialist literature.
For almost every problem there is a technical book in which you will find tips, ideas and instructions for action. In any case, it is always helpful to inform yourself in advance of a project. We offer you a selection of specialist books. You will find that there are often many paths to success. Try it out, test it and have fun finding your own way.
Clamps are absolutely necessary.
For holding and fixing various applications. With our helpers you will be able to create the most complicated designs in model making for further processing.
Viewed