No results were found for the filter!
Micro wheel puller N, Z
Micro wheel puller. For hand pulling at bigger watches with polling counter points 0,7 - 0,9 - 1,2 - 1,5 mm. Also for pulling off insulated wheels of gauge N and Z.
Rail Gauge H0
Rail Gauge (idea: Frank Ottmüller). For checking DC models (14.3 mm) and Märklin (13.8 mm). Aluminium construction.
Model Railway Wheel Puller H0
Mini wheel puller for all areas of model engineering. Clamping range 3-35 mm, span depth 25 mm. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Suitable for pulling locomotive and wagon wheels H0. Tip: Order spare tips at the same time!
Wheel flange cutting tools for RP 25 profiles
Wheel flange cutting tools for RP 25 profiles, for H0 gauge. Measurement 6 x 6 mm. Instructions included.
Wheel flange cutting tools for NEM profiles
Wheel flange cutting tools for NEM profiles (for H0 gauge). Measurement 6 x 6 mm. Instructions included.
Mini wheel puller
Mini wheel puller for all areas of model engineering. Clamping range 3-64 mm, span depth 25 mm, therefore for pulling of bigger wheels. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Tip: Order spare tips at the same time!
Pressure tins (Märklin)
Pressure tins, specially for locomotives make MÄRKLIN. Set of 9 pairs on wooden board for wheel diameter 8 - 10.4 - 12 - 13 - 14 - 16 -18 - 20 - 22.5 mm. Using with press tool no. 90810 or on your lathe with pressing bolts no. 90817.
Pressure tins (diverse Fabrikate)
Pressure tins, together with set 90811 for most locomotives of FLEISCHMANN, ROCO, RIVAROSSI, LIMA, LILIPUT, PIKO makes. Set of 8 pairs on wooden board for wheel diameters 9 - 10 - 11 - 11.5 - 14.5 - 15 - 17 - 18.8 mm. Using with press...
Pressing on your H0-wheels is also possible on your lathe by our pressing bolts: Pressing bolts, set of 2 pieces, 8 mm shank Ø, for clamping in turning- and drilling chuck. Incl. thread, for our pressure tins No. 90 811 and 90 812, which...
Grooving tool. A lathe tool to cut grooves in train wheels for fitting traction tyres. Size of tool 6 x 6 x 63 mm.
Wheel holding fixture
Wheel holding fixture. Designed to firmly hold most train wheels H0 in the lathe, enabling turning and grooving operations to be carried out to RP 25 or NEM. Can be used on different wheel sizes and axle diameters. Instruc-tions supplied.
Wheel Spacer (Back to back) measuring / setting tool for H0 wheels. The tool is supplied with 2 spindle points, one for locomotive wheel setting and one for wagon/carriage wheels fitted on pin-point bearing axles. With set of spindle...
Mini Wheel Puller Z, N, TT, H0
Mini Wheel Puller especially suited for very finde cast model railway wheels with plastic centres, up to 28 mm diameter (Z - N - TT - H0). With spindle point 1.8 Ø standard - for H0. Tip: Order spare tips at the same time!
Wheel set straightener for model railway gauge...
wheelset aligner Newly manufactured in small series: Track 0 Track 1 Allows the subsequent adjustment of the wheel distance of model railway wheels. With it, wheelsets can be compressed or pulled apart to the exact size. The check is...
Add on part for N, TT for Wheel quartering tool
Wheel quartering tool. With the help of this tool it is possible to adjust the 90° shift of crank-wheels of steam engines exactly. The 90° shift can be precisely determined by a prisma containing a crosshair. Illustrated instructions...