Materials

Close filters
 
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Schraubensicherung
Safeguarding fluid
Safeguarding fluid for safeguarding and fastening of small screws and units. A little drop is enough to avoid loosening at machines safely. Safe-guarded screw / nut can always be dismantled. Cont. 10 ml.
Content 10 ml (€55.00 * / 100 ml)
€5.50 *
Schrumpfschlauch Set schwarz in Box (versch. Ø)
Heat shrink tube - Assortment, black
Heat shrink tube, 100 pcs. assortment. Reduces it's diameter by approximately 50% when heated to around 120°C. Use a hot air gun. Assorted pack 1.5-2.5-4-6-10-13 mm diam., in 100 mm lengths. Colour black. In a plastic box.
€5.90 *
Stahlachsen vernickelt (Achsensortiment)
Set of axles
Set of axles. Nickeled steel axles with 3 mm Ø. 2 axles each of 50, 70, 95 and 120 mm length. Can be shortened if needed.
€5.20 *
Zahnräder Set aus Kunststoff (Modul 0,5)
Set of cog-wheels module 0.5
Set of cog-wheels, module 0.5, axle drill holes 2.9 mm. 2 double cog-wheels each with 62/10, 50/10, 48/12, 30/10 teeth, 1 crown-wheel, 1 worm, 3 pinions (worm and 2 pinions hole Ø1.9 mm). Ideal for experimenting.
€5.90 *
Zahnräder Set aus Kunststoff (Modul 1)
Set of cog-wheels module 1
Set of cog-wheels, module 1, axle drill holes 2.9 mm. 2 cog-wheels each with 40, 20, 15, 10 teeth, 1 crown-wheel and 1 worm. Cog-wheels can be stuck together; that makes a great number of gearing combinations possible.
€6.80 *
Kettenantrieb (Set aus Kettenrädern und Kette)
Chain-drive
Chain-drive, consisting of 4 chain-wheels and 1 m chain. Transmissions 1:1 respectively 8:16. Drill holes 2,9 mm Ø. Chain can be shortened as you like. Chain-drives are used für non slip power transmissions over larger distances, while...
€11.50 *
Flüssigmetall zur Reparatur & Bearbeitung
Liquid metal
Liquid metal, repairs damaged metal surfaces, parts with casting defects, fills drill holes and repairs damaged spindles. Hard as steel within 5 hours. Can be worked like metal after drying. Not electrically conductive.
Content 60 g (€29.17 * / 100 g)
€17.50 *
Schrauben Sortimentskasten aus Kunststoff
Screw assortment box, empty
Screw assortment box with transparent plastic hinged lid. Ideal for storage screws, nuts and very small parts. Measurements: 207 x 112 x 23 mm. 36 compartments 15 x 33 x 18 mm each. Delivery as empty box.
€9.95 *
Feder-Bronzedraht Ø 0,3 mm
Bronze spring wire (different Ø)
Bronze spring wire, easy to solder, high conductivity. ldeal for constructing overhead catenary systems. Different diameter: 0.3 mm - rolls of 3 m 0.5 mm - rolls of 2 m
Content 3 Laufende(r) Meter (€0.83 * / 1 Laufende(r) Meter)
From €2.50 *
Kupferdraht verzinnt (Ø 0,80 mm)
Copper wire, tinned
Tinned copper wire, 0.8 mm Ø is suitable to mess around with blanks for coniferous trees. Also you can solder the wire very easily because of the tinned copper wire. Each roll has 3 metre of copper wire.
Content 3 Laufende(r) Meter (€0.83 * / 1 Laufende(r) Meter)
€2.50 *
Hint!
Federstahldrähte rostfrei Edelstahl (verschiedene Ø)
Stainless Spring Steel Wire
Spring steel wire made of stainless steel. Ideal for constructing of springs, ladders, handles, pipings. Length 3 m each (* 1 m). For cutting these extremely hard wire we recommend our side cutting pliers 24913 or 24915. Our other...
From €2.00 *
Flachprofile aus Messing
Flat bar
Profiles of brass, Flat bar, drawn, length 500 mm 1,00 x 1,50 mm - length: 500 mm, 2,00 x 1,00 mm - length: 500 mm, 2,00 x 1,50 mm - length: 500 mm, 2,50 x 1,00 mm - length: 500 mm, 2,50 x 1,50 mm - length: 500 mm, 3,00 x 1,00 mm -...
From €2.30 *
Gewindestangen aus Messing
Threaded Rod
Threaded Rod, brass, length 500 mm
From €3.90 *
H-Profile aus Messing
H-Profiles
H-Profiles , brass, milled, l = 500 mm
From €3.80 *
Holzleisten rund Buche (Rundstäbe)
Beech rod
Beech rod, length 500 mm, packet with 10 pcs. each
From €5.50 *
Holzleisten rechteckig Kiefer (Rechteckleisten)
Wooden Strip, Pine
Wooden Strip, pine, length 500 mm, packet with 10 pcs. each.
Content 10 Stück (€0.45 * / 1 Stück)
From €4.50 *
I-Profile aus Messing
I-Profiles
I-Profiles, milled, h x b, l = 500 mm
From €4.20 *
Lichtleiter für Modellbau Beleuchtung
Light conductors
Light conductors. Fibre optiscout of plastic, conduct light invisibly over long distances round corners and edges into difficult places you want. For lighting of model ships, aeroplanes, engines and signals the light conductors can be...
Content 1 Laufende(r) Meter
€3.70 *
Feines Messinggitter für Modellbau
Brass wire mesh sheet
Brass wire mesh. Sheet size 100 x 150 mm. Especially suited for security of windows, headlamp protection on trucks etc. wire-Ø: 0,20 mm, Mesh size: 0,30 mm, Approx. scale 1:100 wire-Ø: 0,20 mm, Mesh size: 0,50 mm, Approx. scale 1:75...
€5.20 *
Mikro Ketten aus Messing (versch. Stärken)
Micro chains
Micro chains made of brass. For use in model railway engineering, military model engineering, ship's model engineering. Length each 1m. Sizes: wire strength 0.2 mm, Size of one chain link 0.9 x 1.1 mm wire strength 0.3 mm, Size of one...
Content 1 Laufende(r) Meter
€6.20 *
Mikro Stahlseile (verschiedene Stärken)
Micro Steel Ropes
Micro Steel Ropes. Real steel ropes. Length: 1m
€4.10 *
Miniatur-Kugellager aus Edelstahl (metrisch)
Mini ball bearings
Mini ball bearings, metrical-stainless-steel .The most remarkable features of all our ball bearings are their easy running, their long life, the low sound level and the equipment of covering discs on both sides against dirtying (* =...
€7.90 *
Rohre aus Messing
Tubes
Tubes, brass, drawn, d x s, l = 500 mm 1,0 x 0,20 mm, l = 500 mm 1,5 x 0,20 mm, l = 500 mm 2,0 x 0,45 mm, l = 500 mm 2,5 x 0,45 mm, l = 500 mm 3,0 x 0,45 mm, l = 500 mm 4,0 x 0,45 mm, l = 500 mm 5,0 x 0,45 mm, l = 500 mm
From €1.40 *
Plastikrohr transparent variable Länge Ø 16 mm
Plastic tube
Plastic tube, diameter 16 mm with thread infinitely adjustable in length from 35 to 68 cm by telescoping both parts.
€2.80 *
U-Profile aus Messing
U-Profiles
U-Profiles, brass, milled, l = 500 mm, h x b
From €2.90 *
Vierkantprofile aus Messing
Square bar
Square bar, brass, drawn, l = 500 mm
From €1.70 *
Vierkantrohre aus Messing
Square tubes
Square tubes, brass, drawn, l = 500 mm, b x s
From €3.80 *
Winkelprofile aus Messing
Angle
Angle, brass, milled, l = 500 mm, a x b
From €2.90 *
Holzschrauben Rundkopf Schlitz (versch. Größen)
Small woodscrews
Small woodscrews, bright steel with round head, about 100 pcs. each packing.
Content 100 Stück (€0.06 * / 1 Stück)
€5.90 *
Niete aus Kupfer mit Halbrundkopf DIN 660 für Modellbau
Rivets DIN 660 copper with half-round head
Rivets DIN 660 copper with half-round head, about 50 pcs.each packing. d = shank-Ø, D = head-Ø, L = shank length Different sizes: Shank-Ø: 1,00 mm - Head-Ø: 1,80 mm - shanklength: 5,00 mm Shank-Ø: 1,40 mm - Head-Ø: 2,40 mm - shanklength:...
From €3.90 *
Sechskantmuttern aus Messing DIN 934 für Modellbau
Hexagon nuts
Hexagon nuts DIN 934, brass, packet with 10 pcs. Each. d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 m 0,8 1,0 1,2 1,3 1,6 2 s 2,5 3,0 3 3,2 4 5
Content 10 Stück (€0.22 * / 1 Stück)
From €2.20 *
Senkschrauben aus Messing DIN 963 für Modellbau
Countersunk screws DIN 963
Countersunk screws DIN 963, brass, packet with 10 pcs. each d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 D 1,9 2,3 2,6 3 3,8 4,7 k 0,6 0,72 0,84 0,96 1,2 1,5 n 0,25 0,3 0,3 0,4 0,5 0,6 t min 0,2 0,25 0,28 0,32 0,4 0,5 t max 0,3 0,35 0,4 0,45 0,6 0,7
Content 10 Stück (€0.23 * / 1 Stück)
From €2.30 *
Unterlegscheiben aus Messing DIN 433 für Modellbau
Washers
Washers DIN 433, brass, packet with 10 pcs. each M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 d 1.1 1.3 1.5 1.7 2.2 2.7 D 2.5 3 3 3.5 4.5 5 h 0.3 0.3 0.3 0.3 0.3 0.5
Content 10 Stück (€0.14 * / 1 Stück)
€1.40 *
Zylinderschrauben mit Schlitz aus Messing DIN 84 für Modellbau
Cheese head screws
Cheese head screws DIN 84, brass, packet with 10 pcs. each d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 D 2 2,3 2,6 3 3,8 4,5 k 0,7 0,8 0,9 1 1,3 1,6 n 0,25 0,3 0,3 0,4 0,5 0,6 t 0,25 0,3 0,4 0,45 0,6 0,7 w 0,16 0,21 0,21 0,26 0,36 0,56
Content 10 Stück (€0.23 * / 1 Stück)
From €2.30 *
Insulating bushes
Insulating bushes
Insulating bush, wheel disc hole Ø 3.6 mm for MÄRKLIN from 2.1 up to 2.5 mm axes. Insulating bush, wheel disc hole Ø 3.2 mm for MÄRKLIN 2.0 mm axes. Insulating bush, wheel disc hole Ø 3.0 mm for 2.0 mm axes. Insulating bush, wheel disc...
Content 10 Stück (€0.69 * / 1 Stück)
€6.90 *
Federnsortiment Miniatur (Zug & Druck)
Assortment of springs
200 pcs. tension and compression springs of various sizes. This assortment should not fail in your workshop.
€8.90 *
Neusilber Blech Stärke 0,3 mm (verschiedene Abschnitte)
Nickel silver 0.3 mm, pieces.
Nickel silver sheet 0.3 mm, different pieces.
€2.30 *
Schrumpfschlauch Set farbig in Box (versch. Ø)
Heat shrink tube - Assortment, colour
Heat shrink tube, 100 pcs. assortment, color, 2:1, in 100 mm lengths. Ø 1.5 mm (30 pcs. black), Ø 2.5 mm (30 pcs. yellow), Ø 4.0 mm (20 pcs. red), Ø 6.0 mm (10 pcs. green), Ø 10 mm (6 pcs. blue), 13 mm (4 pcs. white). In a plastic box,...
€5.90 *
Silberstahl Stangen für Modellbau (Sortiment á 6 Stück)
Assortment of silver steel
Silver steel, bars length each 500 mm, diameters 1-2-3-4-5-6-8 mm. Silver steel is an excellent material - because hardenable - for production of shafts, axles and tools. Assortment of silver steel, 7 bars length each 500 mm, diameters...
€22.90 *
Federstahlstäbe DIN 17223 poliert (verschiedene Ø)
Spring steel bars
Spring steel, round bars, DIN 17223, in straight lengths of 500 mm.
From €1.10 *
Kupferlackdraht dünn in verschiedenen Farben
Enamelled copper wire
Enamelled copper wire, diameter 0.15 mm, bobbin with 50 m . 8 different colours for model engineering (car-system, signals), soldering temperature approx. 350 °C.
Content 50 Laufende(r) Meter (€0.13 * / 1 Laufende(r) Meter)
€6.50 *
Messingdraht weich (verschiedene Ø)
Brass wire
Brass wire, soft, very malleable, length 3 m each.
From €2.00 *
Messingstreifen für Modellbau (versch. Stärken)
Strips of brass
Strips made from 0.2 mm and 0.3 brass. 8 straight strips in 0.5 - 0.8 - 1.0 - 1.2 - 1.5 - 1.8 - 2.0 - 2.5 width (8 strips in total, one piece each), 200 mm long. Suitable for use with various details on models, e.g. covering elements,...
€18.50 *
Phosphor Bronze Blech federhart (versch. Stärken)
Phosphorus bronze
Phosphorus bronze spring hard 150 x 200 mm
From €7.50 *
Rundmessing Ø 0,20 oder 0,30 mm (Set á 10 Stück)
Round rod, brass, Ø 0.20 or 0.30 mm (10pcs.)
Profiles of brass, round rod, drawn, each 300 mm long. Packed with 10 pieces = 1 packaging unit. Available diameters: 0.20 mm 0.30 mm
From €3.90 * €4.90 *
Rundmessing versch. Ø 0,50 bis 6,00 mm
Round rod Ø 0,50 - 6,00 mm
Round rod, brass, drawn, l = 500 mm 0.5 mm (5 pcs.) 0.6 mm (5 pcs.) 0.8 mm (5 pcs.) 1.0 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 3.5 mm 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6,0 mm
From €1.00 *
Hexagon bar of brass
Hexagon bar of brass
Hexagon bar of brass for model-engineering, l = 500 mm
From €2.00 *
Silberstahl Stangen für Modellbau (verschiedene Ø)
Silver steel
Silver steel, bars length each 500 mm, diameters 1-2-3-4-5-6-8 mm. Silver steel is an excellent material - because hardenable - for production of shafts, axles and tools. Assortment of silver steel, 7 bars length each 500 mm, diameters...
From €1.90 *
1 From 2

Materials that set no limits to your creativity.

Bridges can be built, model modifications can be realised with our brass profiles in smallest dimensions and various shapes such as round, square, hexagonal, T, I, H, U and angle profiles, and small details can be reproduced on models. In most cases, the profile is sawn and can be soldered well.

Our brass and bronze sheets are available in thicknesses from 0.1 mm upwards and, depending on the requirements, can be used to make complete locomotives or carriages, for example, and wheel grinders are made of spring hard bronze sheets. The application possibilities are manifold, whether repair or new model building projects, we offer the model maker a selected assortment.

The intended use determines which materials are used. For example, bronze wire is particularly conductive and is preferred for overhead line construction. Spring steel wire is very elastic, it can be used to build small springs and even for jewellery production the stainless design is suitable. Brass and bronze can be bent into various shapes and soldered very well. Silver steel is often used for the manufacture of axles due to its special hardness.

Small brass chains with closed links are also known as anchor chains. Brass chains can be used, for example, to secure loads. Brass grids and fabrics are turned into fences, covers, screens or nets. 

Brass screws and nuts from M1 upwards, as cylinder, countersunk head or hexagonal bolts are indispensable for model makers. Micronuts made of brass, think of Eiffel Tower,"Blue Wonder" or historic models - unthinkable without rivets.

Our wooden profiles are also becoming increasingly popular, for the construction of cargo, bridge constructions, doll's house furniture and the construction of wooden shingles - you certainly have completely new ideas - trust your imagination!

Viewed