No results were found for the filter!
Pin vice (Ø = 0 - 3,20 mm)
Pin vice with knurled brass handle, nickel plated, with revolving hand plateau light metal, with screw head and 2 hardened double-side collet chucks for reception of small drills. Length 105 mm, capacity 0 – 3.2 mm. Made in Asia.
Twist drill box empty
Twist drill box empty, for storage of twist drills and small tools, clear sliding box with 10 compartments, compartment width approx. 12 mm. The ideal box for storing your smallest drills, milling cutters, etc. Internal dimensions...
Pin vice (Ø = 0,10 - 1,00 mm)
Pin vice, 75 mm long, capacity 0.1 to 1.0 mm with small head for holding small drills and taps.
Pin vice (Ø = 0.3 - 1,20 mm + 1,30 - 2,30 mm)
Pin vice with knurled brass handle, totally hollow throughout with screw head and 2 hardened collet chucks. Capacity 0 - 1.0 and 1.5 - 2.3 mm. Usable for holding little drills, taps and for our 100 mm needle files.
Small Hand Drill
Small Hand Drill. Drill mount with knurled aluminium handle, freely rotating hand rest and three jaws chuck, capacity 0.4 - 3.2 mm.
Mini drill front part
Mini drill front part for work with mini drills and mini milling cutters on milling and drilling machines. Tool consists of a C 6.3 mm shank and a drill chuck, capacity 0.4 – 3.2 mm. Can be changed against bigger drill chuck.
Table drill machine
Table drill machine with tail-spindle feed and ball-bearing spindle. 3 spindle speeds by changing the drive belt. Motor 220-240 Volts, 85 Watts. Spindle speed 1800 - 4700 and 8500 rpm. Including 6 collets, capacity 1.0 - 3.2 mm.
Chuck for table drill machine
Chuck for table drill machine, capacity 0.5 - 6 mm, incl. chuck key.
Hand vice with hollow wooden handle and hollow spindle, capacity 0.5 – 6.5 mm. Total length 155 mm, robust quality.
Vee-block for drilling
Vee-block for boring out of wood, size 120x55x55 mm. Boring of round material, especially of pipes is always a problem for the model engineer. Often the surface of round material. Is damaged while being held in a vice; pipes are pressed...
Twist Drill Set with plastic stand
Twist Drill Set with plastic stand. 41 pcs. HSS quality drills DIN 338 from 1.0 to 5.0 mm, in steps of 0.1 mm.
Oil for drilling and cutting
Oil for boring and cutting. Special oil for drilling, milling, sawing, turning, tapping, grinding. For all types of steel, all types of castings, alu-minium, all types of stainless steels, copper, red cast, and brass. Cont. 120 ml.
Content 120 ml (€5.00 * / 100 ml)
Drill for brass HSS Ø = 1.4mm
Drill for brass HSS, also used for plastics, drill-Ø = shank-Ø = 1.4mm
SET: 91 x HSS twist drills DIN 388 with plastic...
Twist drill set in plastic stand 91 pieces ground HSS quality drills DIN 388, made in Germany from 1.0 to 10.0 mm, increasing by 0.1 mm each. lockable lid