Top seller
Hint!
Hint!
No results were found for the filter!
Hint!
Oil for drilling and cutting
Oil for boring and cutting. Special oil for drilling, milling, sawing, turning, tapping, grinding. For all types of steel, all types of castings, alu-minium, all types of stainless steels, copper, red cast, and brass. Cont. 120 ml.
Content
120 ml
(€5.00
* / 100 ml)
€6.00
*
Hint!
Engine grease B 52
Engine grease B 52 , a very soft metal soap grease for model railways, with little oil giver and marrow of sunflowers for cleaning the oil giver. Contents 7 g. [Link to the manufacturer]
Content
7 g
(€25.57
* / 10 g)
€17.90
*
Watch oil No. 5 for model engineering
Watch oil No. 5 for model engineering, as above, but with little oil giver and marrow of sunflowers for cleaning the oil giver. Contents 3.5 ml. [Link to the manufacturers]
Content
3.5 ml
(€24.29
* / 10 ml)
€8.50
*
Dust brush
Dust brush with plastic handle and white bristles, specially for cleaning machines. Length 150 mm. Made in Asia.
€2.50
*
Klüber paste
Klüber paste. Creamy white greasing and installation paste. As lubricating paste for gears, bearings, surfaces and guideways. As installation paste for seals, screws, seals, gaskets, etc. Temperature range from -40° to +150° C. Contents...
Content
60 g
(€33.17
* / 100 g)
€19.90
*
Brass wire brush
Brass wire brush, slightly curved, length 160 mm, wire diameter 0.15 mm, 3-row.
€4.50
*
Scraper
Scraper. For removing paint, varnish etc. from edges. Handy in restricted places. Opposite end is pointed. Made of steel. Total length 18 cm.
€2.90
*
Watch oil No. 5
Watch oil No. 5. Classical special oil for watches and fine mecha-nisms. Special advantages are its excellent lubricating capacity as well as extraordinary long shelf life. Cont. 20 ml.
Content
20 ml
(€6.45
* / 10 ml)
€12.90
*
High performance PTFE-based grease
Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content
20 g
(€39.50
* / 100 g)
€7.90
*
High performance PTFE-based oil
Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content
25 ml
(€31.60
* / 100 ml)
€7.90
*
BR type compressed air
BR type compressed air, 200ml can, removes fine dust. Strong pressure, no residues, clean, easy to handle, non-corrosive. For cleaning and dusting of electronic components, casings and modules even in hard-to-reach locations.
Content
200 ml
(€4.70
* / 100 ml)
€9.40
*
Brush for machines
Brush for machines, small light handy-brush for removing of chips from machines after drilling, turning, milling. 170x25x65 mm.
€7.90
*
Cutting- and lubrication grease
Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content
350 g
(€5.69
* / 100 g)
€19.90
*
Ultrasonic cleaning bath
Ultrasonic cleaning bath for thorough cleaning of components, gearboxes and optical glasses etc. Stainless steel bath 600 ml, oval 150 x 95 x 50 mm. Built-in auto timer 3 min. Recommended cleaning solution our SR 24 Model train oil No....
€45.00
*
Rust Remover
Rust Remover. Easily removes rust and rust stains from iron, steel, chrome, aluminium, brass and copper. Cont. 120 ml.
Content
120 ml
(€9.33
* / 100 ml)
€11.20
*
SR 24 Model railway oil
SR 24 Model railway oil, general purpose for cleaning of engines and track. Can be used as smoke oil. Non combustible and does not attack plastics. Reliable since many years.
From €6.90
*
Nozzle brushes
Nozzle brushes, set of 5-pcs. made of stainless steel in different diameters from 2.0 - 3.5 mm. Length 10 cm.
€11.50
*
Grease B 52
Grease B 52; a very soft metal soap grease for lubricating gear wheels and gears made of metal and plastics. Contents 7 g.
Content
7 g
(€21.29
* / 10 g)
€14.90
*
Viewed