No results were found for the filter!
Replacement parting blade for parting tool holder
HSS, completely ground. Supplied without tool holder. Spare parting knife for small parting tool holder (0.5 mm wide) Spare parting knife for large parting tool holder (8 x 2 x 75 mm) Parting knife for cutting soft metals. One side has a...
Long-running magnetisation tool
Long-running magnetisation tool for magnetising and demagnetising of screwdriver blades, tweezers and other small steel tools. Each tool incl. working instructions.
Safeguarding fluid for safeguarding and fastening of small screws and units. A little drop is enough to avoid loosening at machines safely. Safe-guarded screw / nut can always be dismantled. Cont. 10 ml.
Content 10 ml (€54.00 * / 100 ml)
Triangular hollow scraper with wooden handle
Triangular hollow scraper with wooden handle Side width: 9 mm Blade length: 80 mm Total length: 180 mm
Adhesive tape, double-sited, approx. 0.1 mm thick, transparent, 15 mm wide, 10 m long. Ideal for installation works.
Set of probes
Set of probes, 3 pcs. with hardened points and nickel plated handles. Great help with cleaning and maintenance. Made in Asia.
Spring hook, made of steel, nickeled, with double function: one side with simple hook for taking off small springs, the other side with S-hook for bringing small springs in position. Length 175 mm, shank 3 mm Ø.
Arkansas oil stone
Arkansas oil stone for especially fine sharpening of all cutting tools. As grinding fluid we recommend our drilling oil No. 90 905. Measurements 100 x 25 x 13 mm.
Mechanics mirror for checking in awkward places. Length 163 mm, Dia. = 20 mm.
Thinner for primer
Thinner for primer, cont. 50 ml. For cleaning the airbrush accessories
Content 50 ml (€5.80 * / 100 ml)
Weathering Powder, Set of 10
Weathering Powder, Set of powders 12 colours, are mostly used dry. They stick very well to matt surfaces. The powders are an imitation for rust, dirt, sooty and dust. Use a paint brush to apply the powder on the surface of the model. If...
Content 10 Stück (€1.99 * / 1 Stück)
Twist Drill Set with plastic stand
Twist Drill Set with plastic stand. 41 pcs. HSS quality drills DIN 338 from 1.0 to 5.0 mm, in steps of 0.1 mm.
Jeweller's saw (fret saw) with head collar screw
Jeweller's saw bow with head tensioning screw in different tension lengths. For all fretsaw blades. Supplied without saw blades. The fretsaw has an adjustable bow - available in the following variants: Ironing depth approx. 150 mm...
From €19.90 *
Special-fretsaw blades, universal application for wood, plastics, horn, gypsum. Pack of 12.
Content 12 Stück (€0.33 * / 1 Stück)
Set of milling cutters
Set of milling cutters, 5 pcs. with C-cut(TiCN) coating, with cylinder-shank Ø 6 mm and 3 flutes. As good as shank type milling and slot drills. Diameters 2-3-4-5-6 mm.
Set of key files
Set of key files. 6 files with wooden handle in plastic wallet: pillar, triangular, square, half round, round, warding. Length of cut 100 mm.
Set of diamond needle files
Set of diamond needle files. 5 files: triangular, square, round, half round, pillar for hard and hardened metals. Length of cut 70mm, length 140 mm in plastic wallet.
File for grooves, pillar
File for grooves, pillar, very thin: 10 x 0.4 mm, 100 mm long, cut 3, without wooden handle.
Multipurpose mini file
Multipurpose mini file with steel handle, PVC-coated. Cut length 100 mm. Cross-section 10 x 4 mm, special cut for work coloured and soft metals, wood and plastics.
Deburrer Martor Trimmex Swivel
Universal-deburrer, holder with turntable blade. Blade fits itself to outlines of working unit. For reaming of edges after cutting of metals and plastics.
Tweezers scissors, 130mm length, for cutting small pieces of paper or thin cardboard.
Cutting tweezers, 15 AGW from EREM, with slanting tip, for precisely detaching small parts from etched details up to approx. 0.25 mm. Length 115 mm.
Reverse action tweezers 160 mm
Reverse action tweezers with duck-bill business end. Length 160 mm.
Small Reverse action tweezers
Small Reverse action tweezers, length 53 mm, grooved jaws, opening of jaws max. 2 mm.
Precision tweezers, with fine curved points. Anti-magnetic stainless steel. Length 108 mm.
Mechanics tweezers, made of steel and for general purpose work. Curved points.
Third hand. Tweezers on iron base, adjustable as you like by 2 ball and socket joints. Leaves both hands free for work.
Assembly tweezers for model engineering
Assembly tweezers for model en-gineering, made of high-grade stainless steel, with thin finely ground smooth faced jaws. Ideal for assembling small units. Length 120 mm.
Assembly Tweezers with two flat even jaws, 45-degree angle, approx. length 120 mm.
Coupling tweezers. (Licence REPA) Assists when coupling and de-coupling model trains gauge 0 and I being equipped with a screw coupling. Length about 150 mm, stainless steel.
Watch makers tweezers
Watch makers tweezers. Precision tweezers with fine pointed ends, antimagnetic. Length 115 mm.
Jewellers tweezers curved
Jewellers tweezers, curved, half pointed. Fitted with guide pin to keep points together. Approx. length 120 mm.
Reverse action tweezers curved 160 mm
Reverse action tweezers, curved with heat resilient handle to 100° C for soldering. Length 160 mm.
Wire stripping pliers
Wire stripping pliers, 140 mm length, with adjusting screw, for stripping of fine flex and wire in model engineering. Made in Germany, Solingen.
Mini Slip Joint Waterpump Pliers KNIPEX Cobra®
Mini Slip Joint Waterpump Pliers, length 125 mm, chrome vanadium steel, brown finished, insulated grips.
Special side cutter
Special side cutter with angled head and without bevel. 135 mm long with spring tension and insulated grips. For the clean cutting of brass casting parts. Best quality made in Solingen (Germany). Not suitable for other uses.
Sheet Bending Pliers
Sheet Bending Pliers. One jaw flat the other round, ploshed head, insulated shanks. For bending small sheet units and sheet strips.
Pliers Stand, made of wood for holding approx. 10 watchmaker's pliers. Pliers are cleary kept and can be easily removed. Delivery without pliers.
Adjusting pliers - pointed jaws
Adjusting pliers for forming of wires, sheet metals, construction parts. Smooth polished inside jaws, box joint, pointed jaws. 130 mm
Adjusting pliers - blunt jaws
Adjusting pliers for forming of wires, sheet metals, construction parts. Smooth polished inside jaws, lap-joint, blunt jaws.
Loop Bending Pliers
Loop Bending Pliers (idea Jürgen Eichardt) 130 mm long, with various thick jaws for bending loops from approx. 0.8 mm Ø on. Only thin soft wires can be bent with these pliers. Instructions enclosed.
Flat / concave nose pliers
Flat / concave nose pliers for fine wire and silver-smiths work. Box joint, with spring.
Special side cutting nipper
Special side cutting nipper, length 130 mm, for cutting our spring wires to max. 1 mm.
Wire cutter for model engineering: Straighten wire, cut wire and isolate it, grasp wire and to set and hoop.
Circlip Plier, external, straight jaws
Circlip Plier, external, straight jaws, Length 140 mm, for rings 3.0 - 10 mm dia.