Products from Fohrmann
No results were found for the filter!
Wire cutter Wire cutter for model engineering: Straighten wire, cut wire and isolate it, grasp wire and to set and hoop.
€39.95 *
Needle Nose Pliers Needle Nose Pliers with plain inside jaws; width at tip only 1.2 x 0.4 mm. For holding small components as well as for holding and angling wires. Length 115 mm.
€24.90 *
Circlip Plier, external, straight jaws Circlip Plier, external, straight jaws, Length 140 mm, for rings 3.0 - 10 mm dia.
€18.90 *
Circlip Plier, external, angled jaws Circlip Plier, external, angled jaws, Length 125 mm, for circlips 3,0 - 10 mm dia.
€22.90 *
Grip Retainingring Plier, straight jaws Grip Retainingring Plier, straight jaws, Length 140 mm, for rings 1,5 - 4 mm dia, fitted with adjusting screw.
€32.90 *
Special side cutter without bevel Special side cutter without bevel. 125 mm long with spring tension action, insulated grips. For the clean cutting of plastic parts. Not be used for other purposes.
€15.90 *
Diagonal cutting nipper Diagonal cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
€20.90 *
Straight cutting nipper Straight cutting nipper, length 115 mm for brass wire up to 0.8 mm, mid steel wire up to 0.5 mm.
€23.90 *
Oblique cutting nipper Oblique cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
€23.90 *
Pliers for squashing small rivet heads Pliers for squashing small rivet heads of mild iron, copper, aluminium. 120 mm long.
€22.90 *
Assembly magnifier Assembly magnifier, 10 x magnifying, adjustable sharpness, on chromium-plated tripod. An indispen-sable tool for assembling fine and small units.
€22.90 *
Head band magnifier with LED Head band magnifier with LED spotlight with four lenses: 1,2x (520-620mm)/ 1,8x (230-320mm)/ 2,5x (150-250mm)/ 3,5x (80-120mm) magnification. Deposit box for 4 lenses and cleaning cloth, incl. 2 batteries AAA 1.5 V. Head band is...
€24.90 *
NEW
Slotted screwdriver with retaining function -... Retaining screwdriver for watchmakers and for use in model making for small screws. Slotted Blade width 2.0 mm length: 120 mm new version
€26.90 *
Micro wheel puller N, Z Micro wheel puller. For hand pulling at bigger watches with polling counter points 0.7 - 0.9 - 1.2 - 1.4 mm. Also for pulling off insulated wheels of gauge N and Z.
€109.00 *
Brush Washing Set Brush Washing Set consists of a glass wit top and a metal sieve inset. When washing your brushes the old colour will not be stirred up again under the sieve inset. Made in Asia.
€14.90 *
File cleaning brush, brass File cleaning brush, brass. A very good result will be achieved by use with cleaning petroleum.
€4.90 *
Dust brush Dust brush with plastic handle and white bristles, specially for cleaning machines. Length 150 mm. Made in Asia.
€3.90 *
Brush for machines Brush for machines, small light handy-brush for removing of chips from machines after drilling, turning, milling. 170x25x65 mm.
€11.90 *
Glass fibre burnishing tool, 4 mm Ø Glass fibre burnishing tool with plastic handle and glass fibre refill (4 mm Ø). Length 120 mm.
€6.50 *
Small fretsaw PUK Innovative vario sawframe, length 260 mm, made of 10 x 5 mm barrel galvanized flat steel. With a progressively adjustable fixture and glass balls reinforced plastic handle. High 65 mm cutting space. Fitted with a saw blade for...
€9.90 *
Hacksaw blade Hacksaw blade, finest tooth (20 teeth/cm), packed of 3 pcs. Professional-quality saw blades with wavy-set, sharp theeth, specially hardened and tempered, with pins. Size: 6 mm x 0.4 mm Length: 150 mm For high quality precise cuts:...
Content 3 Stück (€1.63 * / 1 Stück)
€4.90 *
Cutting- and lubrication grease Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content 350 g (€9.14 * / 100 g)
€32.00 *
Set of Spatula Set of Spatula, 4 different sizes out of stainless steel for stirring, mixing, application fillers, forming. Made in Asia. Length 160 mm.
€14.90 *
Double ended Spatula Double ended Spatula, steel, nickel plated, 180 mm. A universal tool for stirring, mixing, application fillers, forming.
€5.90 *
Liquid metal Liquid metal, repairs damaged metal surfaces, parts with casting defects, fills drill holes and repairs damaged spindles. Hard as steel within 5 hours. Can be worked like metal after drying. Not electrically conductive.
Content 60 g (€29.17 * / 100 g)
€17.50 *
Steel wool Steel wool, produced from specially tough steel wire, rolls of 200 g each. Optimal for grinding and polishing of wood and plastics. Steel wool is more suitable than grinding paper: No scratching marks and no clogging up.
€4.90 *
Micro Abrasive Paper Micro Abrasive Paper for wet and dry grinding. 1 sheet grinding paper each grain 1000, 1200, 1500, 2000. Eeach 230 x 280 mm. For grinding of metal, wood, plastics.
€5.90 *
Mini automatic centre punch - spare punch point... Spare punch point for mini automatic centre punch, only for the older version 40134.
€5.90 *
Small centre punch Small centre punch with fine tip, hardened and nickel-plated. Length 80 mm, diameter 6 mm.
€5.90 *
Internal turning tool made of special steel Internal turning tool, round, made of particularly hard special steel including brass insert for secure clamping. Diameter: 2,00 mm Diameter: 4,00 mm
€23.90 *
Tungsten tip, for refill Tungsten tip, 1 piece, for refill, for our tourning tools 41617 to 41719.
€13.90 *
Replacement screw Torx T8 Replacement screw Torx M2.5 x 5 / T08 made of special steel for turning tools with tungsten tip.
€5.90 *
Tungsten Tips Tungsten tips, ground model, for our tourning tools 41617 to 41719. With these tungsten tips you can achieve an especially fine surface.
€15.90 *
Set of drive belts for UNIMAT Set of drive belts for your UNIMAT 3+4. Set consists of 2 drive belts ZOR 50 6333, 2 drive belts ZOR 50 6336, 1 drive belt ZOR 50 6222. 1 x 36.09 x 3.53 mm 2 x 62.87 x 5.33 mm 2 x 72.39 x 5.33 mm
€11.90 *
Pad foil band Pad foil band (4 pcs.), 13 mm wide each and about 200 mm long, thickness 0.1 – 0.2 – 0.5 – 1.0 mm. Foil bands are for example used for aligning of turning tools in tool holders. According to capacity of your tool holder 3 - 4 tool pads...
€7.90 *
Ultrasonic cleaning bath Ultrasonic cleaning bath for thorough cleaning of components, gearboxes and optical glasses etc. Stainless steel bath 600 ml, oval 150 x 95 x 50 mm. Built-in auto timer 3 min. Recommended cleaning solution our SR 24 Model train oil No....
€47.90 *
Set of mini open-ended spanners Set of mini open-ended spanners with follo-wing sizes: 2.5 x 3.2 mm; 3 x 3.5 mm; 3.5 x 4.5 mm, 4 x 5 mm; 5 x 5.5 mm. Made in Germany.
Content 5 Stück (€8.58 * / 1 Stück)
€42.90 *
Set of open ended spanner Set of open ended spanner, extra thin shanks (1.6 / 2.0 mm) , pressed from chrome-vanadium. Milled mouths. Hardened and nickeled, in plastic wallet. Sizes 3 x 3.5; 4 x 4.5; 5 x 5.5; 6 x 6.5; 7 x 8; 9.x.10 mm. Lengths 125 mm. Made in...
Content 6 Stück (€6.65 * / 1 Stück)
€39.90 *
Colour filter fine netting Colour filter fine netting of high-grade steel for avoiding pollution in paint for model engineering. Usable with our BADGER spray guns.
€12.90 *
Viewed