Products from Fohrmann
No results were found for the filter!
Loop Bending Pliers
Loop Bending Pliers (idea Jürgen Eichardt) 130 mm long, with various thick jaws for bending loops from approx. 0.8 mm Ø on. Only thin soft wires can be bent with these pliers. Instructions enclosed.
Flat / concave nose pliers
Flat / concave nose pliers for fine wire and silver-smiths work. Box joint, with spring.
Special side cutting nipper
Special side cutting nipper, length 130 mm, for cutting our spring wires to max. 1 mm.
Wire cutter for model engineering: Straighten wire, cut wire and isolate it, grasp wire and to set and hoop.
Needle Nose Pliers
Needle Nose Pliers with plain inside jaws; width at tip only 1.2 x 0.4 mm. For holding small components as well as for holding and angling wires. Length 115 mm.
Circlip Plier, external, straight jaws
Circlip Plier, external, straight jaws, Length 140 mm, for rings 3.0 - 10 mm dia.
Circlip Plier, external, angled jaws
Circlip Plier, external, angled jaws, Length 125 mm, for circlips 3,0 - 10 mm dia.
Grip Retainingring Plier, straight jaws
Grip Retainingring Plier, straight jaws, Length 140 mm, for rings 1,5 - 4 mm dia, fitted with adjusting screw.
Diagonal cutting nipper
Diagonal cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
Straight cutting nipper
Straight cutting nipper, length 115 mm for brass wire up to 0.8 mm, mid steel wire up to 0.5 mm.
Oblique cutting nipper
Oblique cutting nipper, length 115 mm for brass wire up to 0.8 mm, mild steel wire up to 0.5 mm.
Pliers for squashing small rivet heads
Pliers for squashing small rivet heads of mild iron, copper, aluminium. 120 mm long.
Assembly magnifier, 10 x magnifying, adjustable sharpness, on chromium-plated tripod. An indispen-sable tool for assembling fine and small units.
Head band magnifier with LED
Head band magnifier with LED spotlight with four lenses: 1,2x (520-620mm)/ 1,8x (230-320mm)/ 2,5x (150-250mm)/ 3,5x (80-120mm) magnification. Deposit box for 4 lenses and cleaning cloth, incl. 2 batteries AAA 1.5 V. Head band is...
Micro wheel puller N, Z
Micro wheel puller. For hand pulling at bigger watches with polling counter points 0,7 - 0,9 - 1,2 - 1,5 mm. Also for pulling off insulated wheels of gauge N and Z.
Brush Washing Set
Brush Washing Set consists of a glass wit top and a metal sieve inset. When washing your brushes the old colour will not be stirred up again under the sieve inset. Made in Asia.
File cleaning brush, brass
File cleaning brush, brass. A very good result will be achieved by use with cleaning petroleum.
Dust brush with plastic handle and white bristles, specially for cleaning machines. Length 150 mm. Made in Asia.
Brush for machines
Brush for machines, small light handy-brush for removing of chips from machines after drilling, turning, milling. 170x25x65 mm.
Glass fibre burnishing tool, 4 mm Ø
Glass fibre burnishing tool with plastic handle and glass fibre refill (4 mm Ø). Length 120 mm.
Innovative vario sawframe, length 260 mm, made of 10 x 5 mm barrel galvanized flat steel. With a progressively adjustable fixture and glass balls reinforced plastic handle. High 65 mm cutting space. Fitted with a saw blade for...
Saw blade without handle
Saw blade 140 mm x 32 mm, 0.3 mm thick, 20 teeth/cm. Without handle.
Piccolo-mitre box out of robust aluminium profile, a = 30 mm, b = 40 mm, c = 180 mm. With stepless adjustable tigh-tening element, with beating flange and removable wooden inset.
Hacksaw blade, finest tooth (20 teeth/cm), packed of 3 pcs. Professional-quality saw blades with wavy-set, sharp theeth, specially hardened and tempered, with pins. Size: 6 mm x 0.4 mm Length: 150 mm For high quality precise cuts:...
Content 3 Stück (€1.30 * / 1 Stück)
Cutting- and lubrication grease
Cutting- and lubrication grease reduces fric-tion between tool and work unit to a minimum. Contents about 350 g.
Content 350 g (€5.69 * / 100 g)
Set of Spatula
Set of Spatula, 4 different sizes out of stainless steel for stirring, mixing, application fillers, forming. Made in Asia. Length 160 mm.
Double ended Spatula
Double ended Spatula, steel, nickel plated, 180 mm. A universal tool for stirring, mixing, application fillers, forming.
Liquid metal, repairs damaged metal surfaces, parts with casting defects, fills drill holes and repairs damaged spindles. Hard as steel within 5 hours. Can be worked like metal after drying. Not electrically conductive.
Content 60 g (€19.83 * / 100 g)
Steel wool, produced from specially tough steel wire, rolls of 200 g each. Optimal for grinding and polishing of wood and plastics. Steel wool is more suitable than grinding paper: No scratching marks and no clogging up.
Micro Abrasive Paper
Micro Abrasive Paper for wet and dry grinding. 1 sheet grinding paper each grain 1000, 1200, 1500, 2000. Eeach 230 x 280 mm. For grinding of metal, wood, plastics.
Mini automatic centre punch - spare punch point...
Spare punch point for mini automatic centre punch, only for the older version 40134.
Small centre punch
Small centre punch with fine tip, hardened and nickel-plated. Length 80 mm, diameter 6 mm.
Tungsten tip, for refill
Tungsten tip, 1 piece, for refill, for our tourning tools 41617 to 41719.