✓ Shipping from 6,90 EUR**
✓ Free shipping from 99 EUR**
✓ International shipping
✓ Secure payment via PayPal

Wheels & Axles

Close filters
from to
No results were found for the filter!
Ersatzspindelspitzen für Abziehvorrichtungen
Replacement spindle points for pullers
Replacement spindle points, hardened, for our wheel pullers and gear wheel puller. 1. 1.8 mm Ø standard (flat) 2. 1.4 mm Ø standard (flat) 3. 1.8 mm Ø pinpoint axles 4. 1.4 mm Ø pinpoint axles 5. Set for all mini wheel pullers with 4...
From €1.50 *
Radsatz Richtgerät für Modellbahn Spur H0 (mit Zubehör TT und N)
Wheel Spacer
Wheel Spacer (Back to back) measuring / setting tool for H0 wheels. The tool is supplied with 2 spindle points, one for locomotive wheel setting and one for wagon/carriage wheels fitted on pin-point bearing axles. With set of spindle...
€29.90 *
Komfort-Lokliege und Profilwinkel
Locomotive cradle
Locomotive cradle comfort for repairing and maintaining model railway cars and locos. Size: 360 x 165 x 60 mm with 2 angles and foam inserts. Sizes H0 - TT - N. Angles / U-profil for H0, TT or N can be ordered also separately by the piece.
€29.90 *
Profilwinkel für Modellbahn Lokliege Linton
Profile bracket for model railway locomotive...
Additional profile bracket for comfort locomotive couch Linton The profile angles are available individually (1 piece each) for the following sizes: Track H0 track TT Track N
€5.20 *
Spurmaß-Lehre für H0
Rail Gauge H0
Rail Gauge (idea: Frank Ottmüller). For checking DC models (14.3 mm) and Märklin (13.8 mm). Aluminium construction.
€14.80 *
Abzieher für Räder Spur TT, N und Z (bis 28 mm Ø)
Mini Wheel Puller Z, N, TT, H0
Mini Wheel Puller especially suited for very finde cast model railway wheels with plastic centres, up to 28 mm diameter (Z - N - TT - H0). With spindle point 1.8 Ø standard - for H0. 
€29.00 *
Stufenbohrer für Märklin Modellbahn Räder
Special step drill
Special step drill, indispensable for insulation of MÄRKLIN-wheels. Model railway wheels must be drilled for insulation in order to take in the insulating bush. Only one-step working with our special step drills. First step drills hole...
€12.50 *
Lehre für Radsatz und Gleis (Spurlehre)
Wheel and track gauge
Wheel and track gauge. For gauging 
€11.90 *
Radsatz Richtgerät für Modellbahn Spur 0 / Spur 1
Wheel Spacer track gauche 0 and 1
Wheel Spacer (Back to back) measuring / setting tool for track gauche 0 and 1.
€49.90 *
Abzieher für Räder Spur N, Z und größere Uhren (bis 1,5 mm Ø)
Micro wheel puller N, Z
Micro wheel puller. For hand pulling at bigger watches with polling counter points 0,7 - 0,9 - 1,2 - 1,5 mm. Also for pulling off insulated wheels of gauge N and Z.
€64.00 *
Abzieher für Räder Spur H0 (bis 35 mm Ø)
Mini wheel puller H0
Mini wheel puller for all areas of model engineering. Clamping range 3-35 mm, span depth 25 mm. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Suitable for pulling locomotive and wagon wheels H0. TIP: Please order replacement spindle...
€24.00 *
Ersatzhaken für Abziehvorrichtungen
Replacement hooks for pullers
2 Replacement hooks for pullers.
€9.00 *
Radprofil-Drehstähle RP 25 für Spur H0 (6 x 6 mm)
Wheel flange cutting tools for RP 25 profiles
Wheel flange cutting tool for RP 25 profiles, for H0 gauge. Measurement 6 x 6 mm. Instructions included.
€37.00 *
Radprofil-Drehstähle NEM für Spur H0 (6 x 6 mm)
Wheel flange cutting tools for NEM profiles
Wheel flange cutting tool for NEM profiles (for H0 gauge). Measurement 6 x 6 mm. Instructions included.
€37.00 *
Abzieher für große Modellbauräder (bis 64 mm Ø)
Mini wheel puller
Mini wheel puller for all areas of model engineering. Clamping range 3-64 mm, span depth 25 mm, therefore for pulling of bigger wheels. Spindle point 1,8 mm Ø (No. 90 802-01), hardened.
€25.00 *
Aufpressvorrichtung für Modellbahnräder
Press tool for H0 wheels
Press tool for H0 wheels, made of solid cast aluminium (idea: Gerd Kerberger). For horizontal and vertical use together with following pressure tins. Delivery without pressure tins.
€159.90 *
Aufpressbüchsen für Loks Märklin
Pressure tins (Märklin)
Pressure tins, specially for locomotives make MÄRKLIN. Set of 9 pairs on wooden board for wheel diameter 8 - 10.4 - 12 - 13 - 14 - 16 -18 - 20 - 22.5 mm. Using with press tool no. 90810 or on your lathe with pressing bolts no. 90817.
€95.00 *
Aufpressbüchsen für Loks (diverse Fabrikate)
Pressure tins (diverse Fabrikate)
Pressure tins, together with set 90811 for most locomotives of FLEISCHMANN, ROCO, RIVAROSSI, LIMA, LILIPUT, PIKO. Set of 8 pairs on wooden board for wheel diameter 9 - 10 - 11 - 11.5 - 14.5 - 15 - 17 - 18.8 mm.
€85.00 *
Pressing bolts
Pressing on your H0-wheels is also possible on your lathe by our pressing bolts:<
€14.90 *
Einstechstahl für Modellbahnräder
Grooving tool
Grooving tool. A lathe tool to cut grooves in train wheels for fitting traction tyres. Size of tool 6 x 6 x 63 mm.
€19.90 *
Spannvorrichtung für Modellbahnräder Spur H0
Wheel holding fixture
Wheel holding fixture. Designed to firmly hold most train wheels H0 in the lathe, enabling turning and grooving operations to be carried out to RP 25 or NEM. Can be used on different wheel sizes and axle diameters. Shank 
€59.90 *
Ritzelabzieher (Abziehvorrichtung) für Modellmotoren
Gear wheel puller
Gear wheel puller. Body made of brass, spindle made of steel with 3 hardened spindle centres for axes of 1.0 - 1.5 – 2.0 mm dia. For pulling plastic and metal gear wheels from model motors. Minimum distance between motor and gear wheel 2...
€24.00 *
90° - Versatz-Vorrichtung für Kurbelräder
Wheel quartering tool
Wheel quartering tool (H0). With the help of this tool it is possible to adjust the 90° shift of crank-wheels of steam engines exactly. The 90° shift can be precisely determined by a prisma containing a crosshair. Illustrated...
€114.90 *
Stufenspannzangen (2 Stück) aus Messing
Step chucks
Step chucks, set of 2 pcs. made of brass; steps of 0.5 mm. For turning wheels, discs and gear wheels in the lathe.
From €39.90 *
Reibahlen - zylindrisch (knapp unter Maß zum aufpressen)
Reamer cylindrical
When fitting wheels, bushes, gears and flywheels, it is necessary to keep the bore below the dia of the axle in order to obtain a firm fit. In order to obtain the "pressure fit" it is essential that a precision table drilling machine or...
€24.90 *
Spurmaß-Lehren für TT, N und Z
Rail Gauge Z-N-TT
Rail Gauge Z (NEM 310 - 5.3 mm) Rail Gauge N (NEM 310 - 7.4 mm) Rail Gauge TT (NEM 310 - 10.2 mm).
€7.90 *
Add on part for N, TT for Wheel quartering tool
Add on part for N, TT for Wheel quartering tool
Add on part for N, TT for Wheel quartering tool
€8.50 *