Products from Fohrmann
No results were found for the filter!
Light conductors Light conductors. Fibre optiscout of plastic, conduct light invisibly over long distances round corners and edges into difficult places you want. For lighting of model ships, aeroplanes, engines and signals the light conductors can be...
Content 1 Laufende(r) Meter
€3.70 *
Brass wire mesh sheet Brass wire mesh. Sheet size 100 x 150 mm. Especially suited for security of windows, headlamp protection on trucks etc. wire-Ø: 0,20 mm, Mesh size: 0,30 mm, Approx. scale 1:100 wire-Ø: 0,20 mm, Mesh size: 0,50 mm, Approx. scale 1:75...
€5.20 *
Micro chains Micro chains made of brass. For use in model railway engineering, military model engineering, ship's model engineering. Length each 1m. Sizes: wire strength 0.2 mm, Size of one chain link 0.9 x 1.1 mm wire strength 0.3 mm, Size of one...
Content 1 Laufende(r) Meter
€6.20 *
Mini ball bearings Mini ball bearings, metrical-stainless-steel .The most remarkable features of all our ball bearings are their easy running, their long life, the low sound level and the equipment of covering discs on both sides against dirtying (* =...
€7.90 *
Plastic tube Plastic tube, diameter 16 mm with thread infinitely adjustable in length from 35 to 68 cm by telescoping both parts.
€2.80 *
Machine taps Machine taps, HSS, equally for blind holes and through holes. One piece of the selected size. Made in Switzerland. 3 sizes: Machine taps 2.0 mm Ø - shank 3 mm. Machine taps 2.5 mm Ø - shank 3 mm. Machine taps 3.0 mm Ø - shank 4 mm.
€12.90 *
Twist drill set of 10 HSS-Spirec drills Twist drill set of 10 HSS-Spirec drills with shank diam. 2.34 mm (0.3 and 0.4 mm foret with shank 1.00 mm). Supplied in a clear plastic box with a sliding lid, enabling the drills to be removed separatel. HSS-Spirec drills, for wood and...
From €32.90 *
Twist drill set with 10 HSS drills Twist drill set with 10 HSS drills DIN 338. Supplied in a clear plastic box with a sliding lid, enabling the drills to be removed separately.
From €11.90 *
Micro needle files round length 100 mm Micro needle files, round, length 100 mm. Special file, almost unobtainable now. Fa. Friedrich Dick Ø 1,0mm - cut 2 Ø 1,2mm - cut 1
From €20.90 *
Wire brushes Wire brushes . The wheel wire brushes are used for cleaning surfaces and for removing flux and scale etc. Approx. 20 mm diameter and supplied with 2.34 mm shank.
From €2.90 *
Countersinks Precision - Countersinks, HSS, 90° DIN 335 C, three-fluted pointed with straight shank, 2 sizes. Head- Ø 4.3 mm - Shank-Ø 4.0 mm - smallest Ø 1.3 mm - total length 40 mm Head- Ø 6.0 mm - Shank-Ø 5.0 mm - smallest Ø 1.5 mm - total length...
€10.90 *
Slot drills Slot drills, short with straigth shank 6 mm Ø and 2 flutes. HSS-E08 DIN 327 Typ N
€14.90 *
Mini milling cutters Mini milling cutters, 3 flutes and cylindrical shank 6 mm. Equally suitable for shank type milling and slot drilling.
€18.90 *
Precision bar clamps Precision bar clamps engineered of solid brass with head screw. Infinitely variable.
From €8.90 *
Scale rulers Scale rulers made of aluminium, robust, solvent-resistant, scratch-resistant, weather-proof, with 30 cm metric graduation on one side and scale on the opposite side.
€9.90 *
SR 24 Model railway oil SR 24 Model railway oil, general purpose for cleaning of engines and track. Can be used as smoke oil. Non combustible and does not attack plastics. Reliable since many years.
Content 250 ml (€35.60 * / 1000 ml)
From €8.90 *
Piercing saw blades Piercing saw blades for wood, plastics and soft metals. Length 130 mm. Packed of 12 pcs. Quality for watchmakers, made in Germany. 6 teeth / cm - 0.39 x 1.03 mm 8 teeth / cm - 0.30 x 0.77 mm 10 teeth/cm - 0.25 x 0.58 mm Piercing saw...
Content 12 Stück (€0.29 * / 1 Stück)
From €3.50 *
Metal circular saw discs Metal circular saw discs, DIN 1837 A, fine pitch. Different widths and diameters: Ø 50 mm (SS) 0.2 mm 0.3 mm 0.4 mm - sold out Ø 32 mm (HSS) 0.5 mm 1.0 mm 2.0 mm 3.0 mm
From €14.90 *
Cutting mat Cutting mat, self-sealing surface. Cutting not influenced by previous cuts. Non-slip material makes cutting safer and protects desk or table surface. Grid lines provide cutting guide; both sides can be used. DIN A2 - 420 x 594 mm DIN A3...
From €8.90 *
Special cutting disk Special cutting disk. "Unbreakable" reinforced with glassfibre. With the aid of our mandrell 55160 can be used in all mini drills. Delivery without mandrell. 1 piece. Different sizes: Ø 22 x 0.2 mm Ø 26 x 0.3 mm Ø 26 x 0.5 mm Ø 25 x 1.0 mm
€5.90 *
Small woodscrews Small woodscrews, bright steel with round head, about 100 pcs. each packing.
Content 100 Stück (€0.06 * / 1 Stück)
€5.90 *
Rivets DIN 660 copper with half-round head Rivets DIN 660 copper with half-round head, about 50 pcs.each packing. d = shank-Ø, D = head-Ø, L = shank length Different sizes: Shank-Ø: 1,00 mm - Head-Ø: 1,80 mm - shanklength: 5,00 mm Shank-Ø: 1,40 mm - Head-Ø: 2,40 mm - shanklength:...
From €3.90 *
Hexagon nuts Hexagon nuts DIN 934, brass, packet with 10 pcs. Each. d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 m 0,8 1,0 1,2 1,3 1,6 2 s 2,5 3,0 3 3,2 4 5
Content 10 Stück (€0.22 * / 1 Stück)
From €2.20 *
Countersunk screws DIN 963 Countersunk screws DIN 963, brass, packet with 10 pcs. each d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 D 1,9 2,3 2,6 3 3,8 4,7 k 0,6 0,72 0,84 0,96 1,2 1,5 n 0,25 0,3 0,3 0,4 0,5 0,6 t min 0,2 0,25 0,28 0,32 0,4 0,5 t max 0,3 0,35 0,4 0,45 0,6 0,7
Content 10 Stück (€0.23 * / 1 Stück)
From €2.30 *
Cheese head screws Cheese head screws DIN 84, brass, packet with 10 pcs. each d M1,0 M1,2 M1,4 M1,6 M2,0 M2,5 D 2 2,3 2,6 3 3,8 4,5 k 0,7 0,8 0,9 1 1,3 1,6 n 0,25 0,3 0,3 0,4 0,5 0,6 t 0,25 0,3 0,4 0,45 0,6 0,7 w 0,16 0,21 0,21 0,26 0,36 0,56
Content 10 Stück (€0.23 * / 1 Stück)
From €2.30 *
Phillips Screwdriver Phillips Screwdriver, freely rotating cap for minimal friction, hanging hole for easy storage or inserting lever, blades manufactured from chrome-molybdenum-vanadium steel, superior hardness, full-length polypropylene core. Type Blade...
From €5.90 *
Mini open-ended spanner Mini open-ended spanner made of stainless steel. Length 75 mm, thickness 1 mm.
€4.50 *
Track clamps Track clamps for holding lengths of flexible track in position during fixing. Also enables the track to be cut precisely and laid accurately. Suitable for all makes of flexible track. Instruction and a hexagon key wrench are enclosd....
Content 2 Stück (€9.45 * / 1 Stück)
From €18.90 *
Step chucks Step chucks, set of 2 pcs. made of brass; steps of 0.5 mm. For turning wheels, discs and gear wheels in the lathe.
From €41.90 *
Insulating bushes Insulating bush, wheel disc hole Ø 3.6 mm for MÄRKLIN from 2.1 up to 2.5 mm axes. Insulating bush, wheel disc hole Ø 3.2 mm for MÄRKLIN 2.0 mm axes. Insulating bush, wheel disc hole Ø 3.0 mm for 2.0 mm axes. Insulating bush, wheel disc...
Content 10 Stück (€0.69 * / 1 Stück)
€6.90 *
Cutting tools 6 x 6 x 60 mm Cutting tools 6 x 6 x 60 mm of especially hardened steel. Rough cutting tool, right Interior turning tool, 130 mm
€14.90 *
Needle files Needle files, round shank, length 160 mm, cut 1 (bastard) Needle files, round shank, length 140 mm, cut 3 (fine) Needle files, round shank, length 100 mm, swiss cut 4 (very fine) hand - round - square - triangular - half round - knife
From €4.50 *
Grindstick and spare belts Grindstick, approx. 165 mm long with one exchangeable grinding band . Special construction of stick provides pushing the 6.4 mm wide band, so it can be used all around. Grit 320. (picture in the foreground) Set of 3 spare belts, grit...
From €2.80 *
Gravers HSS Flat Edge Gravers, thickness of edge 2 mm, length 100 mm. Round Edge Gravers, thickness of edge 1.2 mm, length 100 mm. Onglette Gravers, thickness of back 2 mm, length 100 mm Knife Gravers, thickness of back 2 mm, length 100 mm Depending...
From €14.90 *
Assortment of springs 200 pcs. tension and compression springs of various sizes. This assortment should not fail in your workshop.
€8.90 *
Magnifier lamp with 80 LED's Magnifier lamp with 80 LED's. Large projection and extreme mobility, for table fastening. Projection approximate 110 cm. Magnifer swivelling to 360°, diameter of glass lens 127 mm, magnification x 2.25 (5 dpt).
€109.90 *
Mini automatic centre punch Mini automatic centre punch with spring mechanism and adjustable punching intensity. The point is replaceable. Length 95 mm, 30 gms. Made in Germany.
€26.90 *
Viewed