Products from Fohrmann
No results were found for the filter!
Gauge for gearwheels Gauge for gearwheels. A simple tool out of 0.3 mm nickel silver sheet for quick finding of a gearwheel module.
€5.90 *
Rail Gauge H0 Rail Gauge (idea: Frank Ottmüller). For checking DC models (14.3 mm) and Märklin (13.8 mm). Aluminium construction.
€14.90 *
Carbide pointed scriber Carbide pointed scriber. Steel scriber with carbide tip. Length 145 mm.
€4.90 *
Small steel scriber Small steel scriber with fine, hardened point and aluminium handle. Length 125 mm approx.
€6.90 *
Steel scriber with one straigt and one right... Steel scriber, with one straigt and one right angledpoint. Knurled handle. Length: 250 mm.
€5.50 *
Book: Materialien für den Modellbau Materialien für den Modellbau. In german language only.
€15.00 *
Book: Drehen für Modellbauer - Band 1 In German language only! Drehen für Modellbauer - Jürgen Eichardt Zweibändiges Fachbuch für den schon geübteren Modellbauer Band 1: Das ABC des Hobbydrehers Im anspruchsvollen Modellbau ist der Einsatz einer Werkzeugmaschine meist...
€24.90 *
Book: Drehen für Modellbauer - Band 2 In German language only! Drehen für Modellbauer – Jürgen Eichardt Zweibändiges Fachbuch für den schon geübteren Modellbauer Band 2: Besondere Aufgaben und Technologien Der Autor erläutert etwas schwierigere Operationen und zeigt...
€32.90 *
Book: Metallverarbeitung im Modellbau Metallverarbeitung im Modellbau - Peter Wright In german language only.
€29.00 *
Model Railway Wheel Puller H0 Mini wheel puller for all areas of model engineering. Clamping range 3-35 mm, span depth 25 mm. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Suitable for pulling locomotive and wagon wheels H0. Tip: Order spare tips or/ and hooks at...
€27.90 *
Wheel flange cutting tools for RP 25 profiles Wheel flange cutting tools for RP 25 profiles, for H0 gauge. Measurement 6 x 6 mm. Instructions included.
€46.90 *
Wheel flange cutting tools for NEM profiles Wheel flange cutting tools for NEM profiles (for H0 gauge). Measurement 6 x 6 mm. Instructions included.
€46.90 *
Holder for saw blades (hole 8 mm) Holder, shank 8 mm for our saw blades No. 28 302 - 28 130 with hole 8 mm.
€23.00 *
Mini cutting board Mini cutting board for exact cutting of small profiles up to 5 x 5 mm. Precut guides for cutting angles of 30, 45 and 90 degrees. All metal con-struction. Will accept all saw blades up to 0.5 mm. For sawing metal profiles we recommend...
€62.90 *
Mini wheel puller Mini wheel puller for all areas of model engineering. Clamping range 3-64 mm, span depth 25 mm, therefore for pulling of bigger wheels. Spindle point 1,8 mm Ø (No. 90 802-01), hardened. Tip: Order spare tips or/ and hooks at the same time!
€27.90 *
Hint!
Press tool for H0 wheels Precise wheelset assembly at the highest level With the press-on device for model railway wheels H0 made of solid, green anodized aluminium, you can rely on precise and efficient wheelset assembly in your workshop. Whether horizontal or...
€219.90 *
Pressure tins (Märklin) Pressure tins, specially for locomotives make MÄRKLIN. Set of 9 pairs on wooden board for wheel diameter 8 - 10.4 - 12 - 13 - 14 - 16 -18 - 20 - 22.5 mm. Using with press tool no. 90810 or on your lathe with pressing bolts no. 90817.
€109.90 *
Pressure tins (diverse Fabrikate) Pressure tins, together with set 90811 for most locomotives of FLEISCHMANN, ROCO, RIVAROSSI, LIMA, LILIPUT, PIKO makes. Set of 8 pairs on wooden board for wheel diameters 9 - 10 - 11 - 11.5 - 14.5 - 15 - 17 - 18.8 mm. Using with press...
€104.90 *
Vee-block for drilling Vee-block for boring out of wood, size 120x55x55 mm. Boring of round material, especially of pipes is always a problem for the model engineer. Often the surface of round material. Is damaged while being held in a vice; pipes are pressed...
€13.50 *
Pressing bolts Pressing on your H0-wheels is also possible on your lathe by our pressing bolts: Pressing bolts, set of 2 pieces, 8 mm shank Ø, for clamping in turning- and drilling chuck. Incl. thread, for our pressure tins No. 90 811 and 90 812, which...
€14.90 *
Grooving tool Grooving tool. A lathe tool to cut grooves in train wheels for fitting traction tyres. Size of tool 6 x 6 x 63 mm. Delivery without accessories.
€29.95 *
Wheel holding fixture Wheel holding fixture. Designed to firmly hold most train wheels H0 in the lathe, enabling turning and grooving operations to be carried out to RP 25 or NEM. Can be used on different wheel sizes and axle diameters. Shank diameter 8 mm....
€69.90 *
Wheel Spacer H0 Wheel Spacer (Back to back) measuring / setting tool for H0 wheels. The tool is supplied with 2 spindle points, one for locomotive wheel setting and one for wagon/carriage wheels fitted on pin-point bearing axles. With set of spindle...
€33.90 *
Gear wheel puller Gear wheel puller. Body made of brass, spindle made of steel with 3 hardened spindle centres for axes of 1.0 - 1.5 – 2.0 mm dia. For pulling plastic and metal gear wheels from model motors. Minimum distance between motor and gear wheel 2...
€28.90 *
Die holder (aluminium) Die holder, 32 mm Ø, aluminium, for all dies M 1 - M 2,6 Ø (= 16 mm Ø). Because of low weight special sensitive work possible.
€14.90 *
Tap wrench aluminium M1 - M3 Tap wrench, 32 mm Ø, aluminium, for hand taps M 1 - M 3. Tap is held by a pressure screw.
€14.90 *
Mini Wheel Puller Z, N, TT, H0 Mini Wheel Puller especially suited for very finde cast model railway wheels with plastic centres, up to 28 mm diameter (Z - N - TT - H0). With spindle point 1.8 Ø standard - for H0. Tip: Order spare tips at the same time!
€31.90 *
Wheel quartering tool Wheel quartering tool. With the help of this tool it is possible to adjust the 90° shift of crank-wheels of steam engines exactly (for H0 scale). The 90° shift can be precisely determined by a prisma containing a crosshair. Illustrated...
€124.90 *
Small parting tool holder Small parting tool holder (idea: Detlef Beier). Measurements 6 x 6 x 65 mm including thin, just 0.5 mm wide parting-off-blade for soft metals. One side with straight cut for brass, other side with curved cut for soft steel, alu-minium...
€25.90 *
Hint!
Oil for drilling and cutting Oil for boring and cutting. Special oil for drilling, milling, sawing, turning, tapping, grinding. For all types of steel, all types of castings, alu-minium, all types of stainless steels, copper, red cast, and brass. Cont. 120 ml.
Content 120 ml (€6.25 * / 100 ml)
€7.50 *
Rust Remover Rust Remover. Easily removes rust and rust stains from iron, steel, chrome, aluminium, brass and copper. Cont. 120 ml.
Content 120 ml (€9.92 * / 100 ml)
€11.90 *
Soldering Hook Soldering Hook (1 pcs.) for fixing work parts on our soldering plate No. 61022.
€9.95 *
Reverse action tweezers for soldering 160 mm Reverse action tweezers, with heat resilient handle to 100° C for soldering. Length 160 mm.
€9.90 *
Flat nose pliers with plastic jaws Flat nose pliers, nickel-plated, length 135 mm, with plastic jaws 7mm.
€39.90 *
Handle of plastic Handle of plastic for our needle files and other tools. Capacity 2-5 mm, length 95 mm.
€9.90 *
Parallel flat nose pliers Flat nose pliers, parallel action flat nose pliers, smooth jaws, without cut. Length 125 mm. Opening of jaws max. 10 mm.
€29.90 *
Hint!
Stainless Spring Steel Wire Spring steel wire made of stainless steel. Ideal for constructing of springs, ladders, handles, pipings. Length 3 m each (* 1 m). For cutting these extremely hard wire we recommend our side cutting pliers 24913 or 24915. Our other...
From €2.00 *
Wooden Strip, Pine Wooden Strip, pine, length 500 mm, packet with 10 pcs. each.
Content 10 Stück (€0.45 * / 1 Stück)
From €4.50 *
Viewed